Altistart 22 - Schneider Electric

Settings menu (SEt)Code Name/Description R/W Adjustment range Factory settingSEtSettings menu (continued)ACC M Acceleration time R/W 1..60 s 10 sDetermines motor’s voltage ramp up time, if SSC is set to OFF.Determines motor’s torque ramp up time, if SSC is set to ON.Run commanddEC M Deceleration time R/W FrEE, 1...60 s Free1 to 60FrEEDetermines motor’s voltage ramp down time, if SSC is set to OFF.Determines motor’s torque ramp down time, if SSC is set to ON.v Deceleration timev Freewheel deceleration%RunTime(s)EdCM End of decelerationR/W 0..10 0Threshold for changing to freewheel stop mode at the end of deceleration.Soft deceleration will end when the estimated torque falls below the EdC value.Note: Edc is inactive when dLtA = dLt. In this case, EdC value is not used and is not relevant.MotorvoltageMotorvoltageFreewheelFreewheeldECTime(s)tHPM Motor thermal protectionR/W 10102030To select the class of motor thermal protection, see explanations and curves page 22.v IEC class 10v IEC class 20v IEC class 30 (heavy duty)Note: To activate the Motor thermal protection, set ItH to ErUn or On, page 5952 BBV51330 08/2012