Configuration and User Guide - Tyco Security Products

More documents

Recommendations

Info

Web ConfigurationAdministrator Front PageOnce an Administrator has logged in Figure 3-4 will be displayed.Figure 3-4 Administrator Front PageThe options available to the Administrator are:• Live Video — allows the testing of the attached SDU8 camera by viewing live video;• Configuration — configures the IPSDU8;• Backup Config — allows the IPSDU8 configuration to be saved to a data file;• Update Firmware — allows the IPSDU8 firmware to be updated;• Restart — restarts the IPSDU8;• Refresh — provides a method of updating the System Status of the IPSDU8;• Logout.Checking camera feeds using Live Video functionThe Live Video page provides a simple way to test the video input from the connected SDU8camera. This Live Video page is not intended to be the primary way of viewing the video on theIPSDU8; this should be performed using an Intellex IP or a VideoEdge NVR.3-4 Configuration and User Guide
Web ConfigurationThe Live Video pages are accessible to any authorized user.NoteTo be able to view the Live Video page JavaScript must be installed and enabled on the computerrunning the browser session.Procedure 3-2 Checking the SpeedDome feed using the Live Video function1 Log in to the IPSDU8 using an appropriate user Name and Password; for more details refer toLog in to the IPSDU8 on page 3-2.2 Select Live Video from the IPSDU8 Front Page.The Live Video page is displayed, as shown in Figure 3-5.Figure 3-5 Live Video page3-5
Page 7: Table of ContentsIntroduction 1Over
Page 10 and 11: Table of ContentsxConfiguration and
Page 12 and 13: IntroductionFrame RatesTable 1-1 Fr
Page 14 and 15: InstallationInstallation processEns
Page 16 and 17: Web ConfigurationLog in to the IPSD
Page 20 and 21: Web ConfigurationNoteThe first time
Page 22 and 23: Web ConfigurationIrisZoomOpenAuto I
Page 24 and 25: Web Configuration6 To end the patte
Page 26 and 27: Web ConfigurationFigure 3-7 Main Co
Page 28 and 29: Web Configuration6 If the user is t
Page 30 and 31: Web ConfigurationConfiguring the Vi
Page 32 and 33: Web ConfigurationFigure 3-12 Event
Page 34 and 35: Web ConfigurationSaving the IPSDU8
Page 36 and 37: Web ConfigurationRestoring configur
Page 38 and 39: Web ConfigurationFigure 3-19 Firmwa
Page 40 and 41: Restoring Factory DefaultsRestoring
Page 42 and 43: Technical SpecificationsLED Status
Page 44 and 45: Technical SpecificationsIPSDU8 Dome
Page 46: Index6-2 Configuration and User Gui

Configuration and User Guide - Tyco Security Products

Create successful ePaper yourself

Delete template?

Save as template?