Configuration and User Guide - Tyco Security Products
Configuration and User Guide - Tyco Security Products
Configuration and User Guide - Tyco Security Products
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4 Restoring Factory DefaultsThe IPSDU8 has two physical recessed buttons, a Reset button <strong>and</strong> a Restore button. Refer toFigure 4-1 <strong>and</strong> Figure 5-2 for the location of the buttons. These buttons are only used duringinstallation <strong>and</strong> commissioning of the unit <strong>and</strong> during fault finding; they are not intended to be usedduring normal operation when the camera is installed.Both buttons have black caps on them. The Reset button is closer to the I/O board <strong>and</strong> theRestore button is further from the I/O board.NoteThe restore procedure only resets the web configuration pages to default. To reset the SDU8 tofactory defaults, follow the instructions in the SpeedDome ® Ultra 8 Camera Dome Operator’s<strong>Guide</strong>, 8200-0600-01.View of the board with dome removedRestoreButtonResetButtonFigure 4-1 Reset <strong>and</strong> Restore buttonsResetting the IPSDU8The Reset button, when pressed, will restart the IPSDU8.NotePerforming a reset will not change any saved configuration settings.4-1
Change language