Configuration and User Guide - Tyco Security Products
Configuration and User Guide - Tyco Security Products
Configuration and User Guide - Tyco Security Products
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Technical SpecificationsLED Status DescriptionsPower LED• On with repeating slow short flashes off – normal operation• Rapidly flashing – invalid stored configuration/operating on factory defaults.Client LED• On – operating normally with one client connected• Off – operating normally with no clients connected• Flashing rapidly – network not ready, no IP address assigned.Video/Alarm LED• Not used at this release, indicates alarm conditions.NotePower <strong>and</strong> Video/Alarm LEDs rapidly flashing together indicates a firmware or configurationupdate is in progress.NoteDuring the power up process all three LEDs may flash on or off, however if all three LEDs areflashing together followed by a short delay <strong>and</strong> the flash sequence repeated, this indicates aPower On Self Test (POST) error. The number of rapid flashes indicates the actual error code.Contact Technical Support in this instance.5-2 <strong>Configuration</strong> <strong>and</strong> <strong>User</strong> <strong>Guide</strong>
Change language