Configuration and User Guide - Tyco Security Products

More documents

Recommendations

Info

Restoring Factory DefaultsRestoring factory defaults on the IPSDU8The Restore button must be used in conjunction with the Reset button to restore the IPSDU8 tothe factory defaults.NoteThe restore procedure only resets the web configuration pages to default. To reset the SDU8 tofactory defaults follow the instructions in the SpeedDome ® Ultra 8 Camera Dome Operator’sGuide, 8200-0600-01.Procedure 4-1 Restoring the IPSDU8 factory defaultsCautionLoss of configurationRestoring the factory defaults will result in all saved configuration settings being removed andthe IPSDU8 being restored to the factory settings.1 Ensure that power is being applied to the IPSDU8 from a power supply.2 Press and hold the Restore button.3 Press and release the Reset button.4 Once the power LED starts flashing rapidly release the Restore button.5 Complete Procedure 3-21 to restore the configuration settings from the last backupconfiguration file.4-2 Configuration and User Guide
5 Technical SpecificationsThis section details the pin assignments of the serial connectors, and the environmental andoperating specifications of the IPSDU8.IPSDU8 connectorsAlarm input connector (5 way)Alarm output connector (6 way)AC powerconnectorNetwork connector (RJ-45)Figure 5-1 IPSDU8 connectorsLEDs and Restore/Reset buttonsRestore ButtonReset ButtonVideo/Alarm LED,yellow(Note)Client LED,orangePower LED, greenView of the board with dome removedNoteFigure 5-2 LEDs and Restore and Reset buttonsThe Video/Alarm LED is not used in this release except during a firmware or configuration upgradeprocess and during the Power On Self Test (POST).5-1
Page 7: Table of ContentsIntroduction 1Over
Page 10 and 11: Table of ContentsxConfiguration and
Page 12 and 13: IntroductionFrame RatesTable 1-1 Fr
Page 14 and 15: InstallationInstallation processEns
Page 16 and 17: Web ConfigurationLog in to the IPSD
Page 18 and 19: Web ConfigurationAdministrator Fron
Page 20 and 21: Web ConfigurationNoteThe first time
Page 22 and 23: Web ConfigurationIrisZoomOpenAuto I
Page 24 and 25: Web Configuration6 To end the patte
Page 26 and 27: Web ConfigurationFigure 3-7 Main Co
Page 28 and 29: Web Configuration6 If the user is t
Page 30 and 31: Web ConfigurationConfiguring the Vi
Page 32 and 33: Web ConfigurationFigure 3-12 Event
Page 34 and 35: Web ConfigurationSaving the IPSDU8
Page 36 and 37: Web ConfigurationRestoring configur
Page 38 and 39: Web ConfigurationFigure 3-19 Firmwa
Page 42 and 43: Technical SpecificationsLED Status
Page 44 and 45: Technical SpecificationsIPSDU8 Dome
Page 46: Index6-2 Configuration and User Gui

Configuration and User Guide - Tyco Security Products

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?