Nesting Manual - BobCAD-CAM

More documents

Recommendations

Info

BobNEST Software User <strong>Manual</strong>Approach & Entry PageMaterial Approacho Top of Part: This is the face of the material that is to be machined in relation to thework coordinate zero position.o Rapid Plane: The height at which the tool can rapid safely from operation to operation.Parts Page30 Real Solutions for Global Manufacturing
BobNEST Software User <strong>Manual</strong>Parts List: Each part assigned to the nesting feature will be listed inside of this list box.Information such as the Part ID number, length, width, quantity of parts, part type, part priority,and active setting will be displayed for each part. The user can click on a specific part in orderto edit the part type, priority, quantity, and as well as whether or not that specific part will beused in the nesting feature. After clicking on the part, a preview of this part will be shown inthe preview window.While a part is highlighted there are four properties that can be altered:Part Properties Part Type: This option allows the user to specify whether a part is to be used as a PartIn Part (PIP) or a Primary part.Primary: This is the default option for a part.PIP: (part in part): Parts using this setting will only be nested inside of theprimary shapes. If no space exists for the PIP to be nested, they will be omittedfrom the nested results.Priority: This field allows the user to assign a numeric priority value to the part. Thesmaller the value the more important the part is to the nesting engine.Quantity: This is the number of highlighted parts that you wish to nest.Active: If you un-check this option the highlighted part will not be considered fornesting. The part will remain assigned to the nesting feature, allowing you to make itactive later.Remove: Clicking this button will remove the highlighted part from the list of partsassigned to the nesting feature.Parameters PageReal Solutions for Global Manufacturing 31
Page 8 and 9: BobNEST Software User Manual8Real S
Page 13 and 14: BobNEST Software User ManualWhile a
Page 15 and 16: BobNEST Software User ManualNesting
Page 17 and 18: BobNEST Software User ManualSelect
Page 19 and 20: BobNEST Software User Manual2.3 The
Page 21 and 22: BobNEST Software User ManualExport
Page 23 and 24: BobNEST Software User ManualNest Pa
Page 25 and 26: BobNEST Software User ManualDado Se
Page 27 and 28: BobNEST Software User Manual1. Firs
Page 29: BobNEST Software User Manual3. The
Page 33 and 34: BobNEST Software User Manual2.6 Las
Page 35 and 36: BobNEST Software User ManualReal So
Page 37 and 38: BobNEST Software User Manual4. The
Page 39 and 40: BobNEST Software User Manual9. Now
Page 41 and 42: BobNEST Software User Manual13. For
Page 43 and 44: BobNEST Software User Manual21. In
Page 45 and 46: BobNEST Software User Manual26. At
Page 47 and 48: BobNEST Software User Manual2. The
Page 49 and 50: BobNEST Software User Manual7. Next
Page 51 and 52: BobNEST Software User Manual11. Aft
Page 53 and 54: BobNEST Software User Manual4. Begi
Page 55 and 56: BobNEST Software User Manual8. Clic
Page 57 and 58: BobNEST Software User Manual13. Cli
Page 59 and 60: BobNEST Software User ManualIt is i

Nesting Manual - BobCAD-CAM

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?