Nesting Manual - BobCAD-CAM

More documents

Recommendations

Info

BobNEST Software User Manual15. In this example, we will want to leave Generate tool path before nesting checked, since we dowant to create the tool path for this nested result. Otherwise the nesting system will only nestthe parts and will not generate any tool path.The Cutting Direction, Start/Direction, and Toolpath Pattern can be left at the defaults.16. The Machining Order group can be ignored since we are simply profiling in this example, aswe have no holes or Dadoes.17. The Cutting Order can be left to By Part, meaning each part will be completely cut from thestock before moving to the next part. Inner profiles will also be cut before the outer profile ofthe part. If we were to switch to By Sheet, then all of the inner profiles will be cut for the entiresheet, before returning to cut the outside profiles of each part.18. For this example we will leave the Bridge Distance set to 0, because we want to nest theseparts as closely together as we can.19. Set the Stock Margin to 0.5000 to leave a margin around the outside of the sheet.20. Now that our Nesting Parameters are complete, click the Next button to move to the tooldefinition page.42 Real Solutions for Global Manufacturing
BobNEST Software User Manual21. In this example we are going to use a 0.125 profiling tool. This would be applicable toLaser/Plasma/Waterjet machining. The user can click the Edit Advanced button to display thenormal Profile machining dialog where they can edit things such as further tool information,feeds and speeds, etc. Seeing that we have no Dadoes or drilling occurring (common to routernesting), we can simply ignore these fields.22. Simply change the Tool Diameter to 0.125 and click Finish.Real Solutions for Global Manufacturing 43
Page 8 and 9: BobNEST Software User Manual8Real S
Page 13 and 14: BobNEST Software User ManualWhile a
Page 15 and 16: BobNEST Software User ManualNesting
Page 17 and 18: BobNEST Software User ManualSelect
Page 19 and 20: BobNEST Software User Manual2.3 The
Page 21 and 22: BobNEST Software User ManualExport
Page 23 and 24: BobNEST Software User ManualNest Pa
Page 25 and 26: BobNEST Software User ManualDado Se
Page 27 and 28: BobNEST Software User Manual1. Firs
Page 29 and 30: BobNEST Software User Manual3. The
Page 31 and 32: BobNEST Software User ManualParts L
Page 33 and 34: BobNEST Software User Manual2.6 Las
Page 35 and 36: BobNEST Software User ManualReal So
Page 39 and 40: BobNEST Software User Manual9. Now
Page 41: BobNEST Software User Manual13. For
Page 45 and 46: BobNEST Software User Manual26. At
Page 49 and 50: BobNEST Software User Manual7. Next
Page 51 and 52: BobNEST Software User Manual11. Aft
Page 53 and 54: BobNEST Software User Manual4. Begi
Page 55 and 56: BobNEST Software User Manual8. Clic
Page 57 and 58: BobNEST Software User Manual13. Cli
Page 59 and 60: BobNEST Software User ManualIt is i

Nesting Manual - BobCAD-CAM

Create successful ePaper yourself

Delete template?

Save as template?