BRC Series System Guide - Sony

More documents

Recommendations

Info

JoystickMovement of thecameraSettingAdjusting the cameraIncline to the right.While holding downMODESHIFTONE PUSH AWBVALUE/RBACK LIGHTPress.Incline to the right.While holding downFOCUSAUTO/MANUALBRIGHT/B ONE PUSH AFFocusing on a subjectNotePress.The setting above only changes the signal emittedfrom the RM-BR300 Remote Control Unit, and doesnot change any camera settings.If the STANDBY lamp of the camera flashesWhen the camera is moved or turned by hand orby external shock, the microcomputer inside thecamera my not be able to memorize the pan/tiltposition properly. To reset the pan/tilt position,press the PAN/TILT RESET button.To focus the camera on a subjecautomaticallyPress the AUTO/MANUAL button so that the AUTOIndicator lights.NoteThe camera focuses on the subject in the center ofthe screen automatically.To focus the camera on a subject manuallyPress the AUTO/MANUAL button so that theMANUAL Indicator lights. Then turn the FOCUScontrol clockwise or counterclockwise to make thecamera focus on the subject.Focusing on a nearsubjectFocusing on a farsubjectSTANDBY flashes.ZoomingTurn the dial on the upper part of the joystick.Subject appearsfarther away.(Wide angle)Subject appearscloser. (Telephoto)One-push auto focusing during manualfocus adjustmentPress the ONE PUSH AF button. The camera focuseson the subject in the center of the screenautomatically.NoteWhen you perform a pan/tilt operation with acamera in Telephoto mode, the screen image maymove at an uneven speed.Backlight Compensation functionWhen you shoot a subject with a light sourcebehind it, press the BACK LIGHT button. To cancelthis function, press the BACK LIGHT button again.NoteThe Backlight Compensation function is not effectiveif the mode is set to MANUAL in the camera’sEXPOSURE menu.28 Remote Operation
Spotlight Compensation functionHold down the SHIFT button and press the BACKLIGHT button. To cancel this function, hold downthe SHIFT button and press the BACK LIGHT buttonagain.NoteThe Backlight and Spotlight Compensation functionscannot be used simultaneously.Adjusting the white balanceNoteBefore adjusting the white balance, shoot a whiteobject under the same lighting conditions as thesubject you want to shoot, and zoom it in on thescreen. (You can use a white wall, etc., instead of theobject.)To adjust the white balance automatically1 Set White Balance to ONE PUSH in the camera’sCOLOR menu.2 Press the ONE PUSH AWB button. The whitebalance is adjusted automatically.BRC-Z330WHITE BALANCE setting R control B controlMANUAL Red gain control Blue gain controlAUTO 1/2, ONE PUSH WB R. SHIFT control WB B. SHIFT controlAdjusting the brightness1 Set the mode to SHUTTER Pri, IRIS Pri, GAIN Pri, orMANUAL in the camera’s EXPOSURE menu.2 Press the MODE button so that the VALUE andBRIGHT indicators on the VALUE/R and BRIGHT/Bcontrols light (Brightness Adjustment mode).3 Adjust the brightness with the VALUE/R orBRIGHT/B control.Turn toward – for darkeningthe picture by changingshutter speed, gain level orF-number.Turn toward + for brighteningthe picture by changingshutte speed, gain level orF- number.To adjust the white balance manually1 Set White Balance to MANUAL in the camera’sCOLOR menu.2 Press the MODE button so that the R and Bindicators on the VALUE/R and BRIGHT/B controlslight (White Balance Adjustment mode).3 Adjust the red gain with the R control and theblue gain with the B control.Turn toward – forweakening red.Turn toward + foremphasizing red.Turn toward – for darkeningthe picture by changingexposure compensation level,F-number or gain level.Functions of the VALUE and BRIGHT controlsThe functions of the VALUE control and the BRIGHTcontrol change according to the mode setting inthe EXPOSURE menu, as follows:BRC-H700MODE settingFunction ofVALUE controlTurn toward + for brighteningthe picture by changingexposure compensation level,F- number or gain level.Function ofBRIGHT controlTurn toward – forweakening blue.Turn toward + foremphasizing blue.FULL AUTONot usedExposure compensationlevel control*SHUTTER Shutter speed Exposure compensationPriority control level control*Functions of the R and B controlsWhen White Balance Adjustment mode is selectedwith the MODE button on the RM-BR300 RemoteControl Unit, the functions of the R control and Bcontrol change according to the White Balancesetting in the camera’s COLOR menu.BRC-H700WHITE BALANCE setting R control B controlMANUAL Red gain control Blue gain controlAUTO, ONE PUSH WB SHIFT control WB SHIFT controlBRC-Z700WHITE BALANCE setting R control B controlMANUAL Red gain control Blue gain controlAUTO 1/2, ONE PUSH WB R. SHIFT control WB B. SHIFT controlIRIS F-number Exposure compensationPriority control level control*GAIN Priority Gain control Not usedMANUALShutter speedcontrolF-number and gaincontrol* When EX-COMP is ON in the EXPOSURE menu.Remote Operation29
Page 2: 2 Using the BRC-H700/BRC-Z700 as a
Page 8 and 9: 3Key FeaturesAll-in-one P/T/Z Desig
Page 10 and 11: Other FeaturesFlexible installation
Page 12 and 13: BRC and BRU SystemBRC-H700 BRC-Z700
Page 14 and 15: OFFOFFONONRSetting of the BOTTOM sw
Page 16 and 17: 5.1.3 BRC-Z330Rear1 2 3 4 5 6 7Pin
Page 18 and 19: Bottom12 13 142Switch 2 (RS-232C/RS
Page 20 and 21: 10 VISCA RS-232C OUT connector11 CA
Page 22 and 23: 5.3.8 BRBK-HD2 HD-SDI OutputCard15.
Page 24 and 25: 7Remote Operation7.1 IR Remote Comm
Page 26 and 27: Improved functionality with theRM-B
Page 30 and 31: BRC-Z700BRC-Z330MODE settingFunctio
Page 32 and 33: Preset memoryPreset Memory 1: All o
Page 34 and 35: 7 8 94 5 61 2 30 .CAMCAMERADSK/AUXP
Page 36 and 37: 9Operation with the AWS-G500 Series
Page 38 and 39: 9.3 Operating the PGM and NEXT Sele
Page 40: 11 SpecificationsBRC-H700 BRC-Z700
Page 44 and 45: BRU-H700TopSide210 (8 3/8) 86 (3 1/
Page 46 and 47: Ceiling Bracket (B) for BRC-Z33012
Page 48 and 49: 13.4 Estimated Viewing Angle of BRC
Page 50 and 51: Estimated Viewing Angle (width)BRC-
Page 52 and 53: Estimated Viewing Angle (width)BRC-
Page 54 and 55: 13.8 Function priorityThis table sh
Page 57 and 58: 13.11.2 Wiring Diagram of VISCA RS-
Page 59 and 60: 14Installing the Camera in a High P
Page 61 and 62: 9 Connect the cables to the connect
Page 63 and 64: 8 Connect the cables to the connect
Page 66: Distributed by© 2008 Sony Corporat

BRC Series System Guide - Sony

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?