BRC Series System Guide - Sony

13.8 Function priorityThis table shows which setting takes priority over the other in each function when theBRC-H700/BRC-Z700/BRC-300/300P is connected to the BRU-H700/BRU-300/300P.BRC camerasBRURS-232C/RS-422 control disable enableDATA MIX setting disable enableVISCA ID setting disable* enableVIDEO OUT enable enable*The camera number setting at camera unit should be 0 (Auto).To assign VISCA ID to each camera, please set it on BRU side.13.9 Data MixBy setting the DATA MIX switch to ON, you can overlap the menu on top of the video signal output from theinstalled interface board. When the switch is set to OFF, the menu does not overlap the video. The switchsetting of the BRU-H700 takes priority over that of the BRC cameras. For example, if the switch of the BRU-H700 is ON and the switch of the camera is OFF, the menu will be displayed on the video images.DATA MIX switch on the BRC-H700 (rear)DATA MIX switch on the BRC-Z330 (rear)DATA MIX switch on the BRC-Z700 (rear)DATA MIX switch on the BRU-H700 (front)54 Techinical Appendix