BRC Series System Guide - Sony

4 Attach the attachment materials (not supplied)to the ceiling bracket (B), and install the bracketon the ceiling. Align the hole on the ceilingbracket (B) in the direction where the front of thecamera will be positioned later.Attachment materialsCeilingCautionFor attaching the wire rope to the bracket, use onlythe supplied screw. Using another screw maydisable the function of the wire rope.7 Insert the protrusions on the ceiling bracket (A)into the spaces prepared in the ceiling bracket(B) with the hole in the front of the ceilingbracket (A) aligned with the hole on the ceilingbracket (B), and temporarily attach them byturning the ceiling bracket (A) with the cameraclockwise.Ceiling bracket (B)hole5 Attach the wire rope to the materials near theceiling. Use an M5 (3/16 inch) hexagon sockethead cap screw (not supplied). Attach the wirerope to an area independent of the area wherethe ceiling bracket is attached.Wire rope (supplied)Attachment materialsCeilingAlign.CeilingCeiling bracket (B)12Ceilingbracket (A)M5 (3/16 inch)hexagon socket headcap screwCeiling bracket (B)6 Attach the wire rope to the ceiling bracket (A).Pass the wire rope through the fixing hole andattach its end to the attachment hole on thebracket using the supplied one screw (3M4 × 8).Wire rope (supplied)8 Secure the ceiling brackets (A) and (B) usingthe supplied three screws (3M3 × 8).CeilingM4 x 8 (supplied)Fixing hole for wire ropeCeiling bracket (A)M3 x 8(supplied)60 Installing the Camera in a High Position