Installation Manual - Panasonic

More documents

Recommendations

Info

2.2 Installing the Advanced Hybrid System4. Affix the PBX to the screw heads.Notes• Do not block the openings of the cabinet. Leave at least 20 cm of space above and 10 cmto the sides of the PBX for ventilation.• Make sure that the wall behind the cabinet is flat and free of obstacles, so that the openingson the back of the cabinet will not be blocked.• Be careful not to drop the cabinet.38 Installation Manual
2.2 Installing the Advanced Hybrid System2.2.8 Installing Surge ProtectorOverviewA massive electrical surge can be caused if lightning strikes a telephone cable 10 m above ground,or if a telephone line comes into contact with a power line. A surge protector is a device that isconnected to an outside (CO) line to prevent potentially dangerous electrical surges from entering thebuilding via the outside (CO) lines and damaging the PBX and connected equipment.To protect the PBX from electrical surges, we strongly recommend connecting the PBX to a surgeprotector that meets the following specifications:– Surge arrestor type: 3-electrode arrestor– DC spark-over voltage: 230 V– Maximum peak current: at least 10 kAAdditionally, proper earthing is very important for the protection of the PBX. (→ 2.2.5 ConnectingFrame Earth)InstallationMany countries/areas have regulations requiring surge protection. Be sure to comply with allapplicable laws, regulations, and guidelines.Outside(CO) LineSurgeProtectorOutside(CO) LineTerminalBoardOutside(CO) LineExtn.PBXExtn.Extn.SLTPTFrame EarthEarthExtn.: Extension lineInstallation Manual 39
Page 1 and 2: Advanced Hybrid SystemInstallation
Page 3 and 4: Important NoticePrior to connection
Page 5 and 6: Precautions• Keep the unit away f
Page 7 and 8: WARNING• THIS UNIT MAY ONLY BE IN
Page 9 and 10: IntroductionAbout the Installation
Page 11 and 12: How to replace the fuse: Open the f
Page 13 and 14: 3.2.1 Connection ..................
Page 15 and 16: Section 1System OutlineThis section
Page 17 and 18: 1.2 Basic System Construction1.2 Ba
Page 19 and 20: 1.3 Specifications1.3 Specification
Page 21 and 22: 1.3 Specifications1.3.3 System Capa
Page 23 and 24: Section 2InstallationThis section p
Page 25 and 26: 2.1 Before Installing4. Use 2-pair
Page 27 and 28: 2.2 Installing the Advanced Hybrid
Page 42 and 43: 2.3 Installing Optional Service Car
Page 48 and 49: 2.4 Connecting Outside (CO) Lines2.
Page 50 and 51: 2.5 Connecting ExtensionsMaximum Ca
Page 52 and 53: 2.6 Connecting Doorphones and Door
Page 54 and 55: 2.6 Connecting Doorphones and Door
Page 56 and 57: 2.7 Connecting Doorbell or Door Chi
Page 58 and 59: 2.8 Connecting PeripheralsPagerthe
Page 60 and 61: 2.8 Connecting PeripheralsRS-232C S
Page 62 and 63: 2.10 Starting the Advanced Hybrid S
Page 64 and 65: 2.10 Starting the Advanced Hybrid S
Page 66 and 67: 3.1 Installing KX-TEA308 Maintenanc
Page 68 and 69: 3.2 Connection3.2 Connection3.2.1 C
Page 70 and 71: 3.2 ConnectionWindows XP1. Connect
Page 72 and 73: 3.2 Connection3.2.3 Accessing PBX v
Page 74 and 75: 3.2 Connection74 Installation Manua
Page 76 and 77: 4.1 Troubleshooting4.1 Troubleshoot
Page 78 and 79: 4.1 Troubleshooting4.1.3 OperationP
Page 80 and 81: 4.1 Troubleshooting4.1.5 System Res
Page 82 and 83: 5.1 Revision History5.1 Revision Hi
Page 84 and 85: IndexNumerics2-Channel Voice Messag
Page 86: Panasonic Communications Co., Ltd.1

Installation Manual - Panasonic

Create successful ePaper yourself

Delete template?

Save as template?