Installation Manual - Panasonic

2.10 Starting the Advanced Hybrid System2.10 Starting the Advanced Hybrid System2.10.1 Starting the Advanced Hybrid SystemThis section explains the required procedure for starting the PBX for the first time, or when using theoptional 2-Channel Voice Message Card (KX-TE82492) for the first time.1. Make sure that all outside (CO) lines you use are connected to the PBX.2. Set the Power Switch to the "OFF" position.3. If installing the 2-Channel Voice Message Card, insert it into the PBX. (→ 2.3.4 2-Channel VoiceMessage Card (KX-TE82492))4. Connect the AC cord to the PBX, then plug the AC cord into an AC outlet.5. Set the Power Switch to the "ON" position.NoteFor safety reasons, do not stretch, bend, or pinch the AC cord.AC CordTo AC OutletPower Switch6. Enter system programming mode.a. Connect a proprietary telephone (PT) to extension jack 01 of the PBX.b. Press the PROGRAM button.c. Press #.d. Enter your System Password (Default: 1234).7. Perform the following procedure,[when starting the PBX for the first time]To initialise the PBX with the default values:a. Enter 999.b. Press the NEXT (SP-PHONE) button and "All Para" is displayed.c. Press the STORE (AUTO DIAL/STORE) button.d. Press the END (HOLD) button.62 Installation Manual