Mobrey

8. Scroll down to “Start time #1” and press ENT.9. Use ⇒ key to highlight the first digit in the time, scroll up and down to edit the digit. Use the left and rightarrows to move to the next digit (the time is programmed in hours and minutes h : m). When the correct starttime is shown on the display press ENT.0Start Time #1 h:m 07:30 P25410. Press ESC to return to the DESLUDGE menu.11. Scroll down to “Interval #1” and press ENT.12. The interval is the time that the control unit waits between the end of one desludge and the start of the next.To set the interval use ⇒ key to highlight the first digit in the interval, scroll up and down to edit the digit.Use the left and right arrows to move to the next digit (the time is programmed in hours and minutes h : m).When the correct interval is shown on the display press ENT.13. Press ESC to return to the DESLUDGE menu.14. Scroll to “Stop on” and press ENT.15. Use ⇒ key to highlight the option, scroll to the “PV