Mobrey

2.0 SENSOR TYPES2.1 SUSPENDED SENSOR TYPE MSM4336110220Standard gap = 150mmR¾" (BS21:1973)¾" BSPT22Material :316 Stainless steelGap size :100mm, 150mm, 200mm,300mm, 450mm(others on request)Cable :Dual twin-axialMax. Pressure : 105 kg/cm2 (103 bar)Temperature range : -40°C to + 70°C (others onrequest) Refer to Sensorsafety data for intrinsicallysafe systemsSpecify gap3050 to 450mm30Figure 3 : MSM433 Sensor and Specifications2.2 MOBREY PIPE SECTION SENSORSThe Mobrey pipe section is used as part of a pipeline transporting the slurry to be monitored. Each pipe sectioncontains two sensors, installed with their faces accurately aligned and flush with the pipe inner wall, to avoid anyexcessive slurry or grease build up on the faces.455Retaining nutLocation pin'O' ringSealingfaceMaterial pipe section :Material sensors :Drain fitting :Mounting connection :Flanges :Max pressure :Temperature range :Sensor cable :Cable length :Cable junction box :Malleable cast iron epoxy coated316 stainless steel1" NPTIn line installationDN100, DN150, DN200 to BS4772(others on request)10 Bar (PN10)-40°C to +70°C(for T6), +120°(for T5)(Others on request)Refer to Sensor safety data for intrinsicallysafe systemsOil hose protected on pipe section,Screened twisted pair7m dual twin-axial from junction box (otherson request)IP65 aluminium alloyFigure 4 : MSM448 Pipe Section Sensors7IP258