Mobrey

Parameter Description Min. Max. DefaultNo. value value Ex-FactoryP130 Span 1 @ 1MHz Measured attenuation - - 0.0P131 Span 1 @ 3.3MHz Measured attenuation - - 0.0P132 Span 2 @ 1MHz Measured attenuation - - 0.0P133 Span 2 @ 3.3MHz Measured attenuation - - 0.0P134 Span 3 @ 1MHz Measured attenuation - - 0.0P135 Span 3 @ 3.3MHz Measured attenuation - - 0.0P140 Date for Span 1 - - 0P141 Date for Span 2 - - 0P142 Date for Span 3 - - 0P150 Lab Value 1 - - 0P151 Lab Value 2 - - 0P152 Lab Value 3 - - 0P160 Max % Solids - - -P200 PV UnitsThe PV units can be selected from a list(%, kg/hr, lb/hr,g/l, ppm, None) - - %P201 Density Units - - %P240 Description - - -16 character user-defined description of application, say. MSM400 MONITP241 Message - - -User set up message for HART info32 CharsP242 Tag Number - Control Unit - - -User-defined alpha-numeric entry up to 32 characters inMSM40055accordance with HART. May be entered by keypad.P250 Start OnThis parameter is used to set up the mode of startfor a desludge operation and is selected from a list(Time, PV, Ext. Trig) 1 3 noneP251 Stop OnThis parameter is used to set up the mode of stopfor a desludge operation and is selected from a list(Time, PV, Ext. Trig) 1 3 noneP252 Do not Start ifThis parameter is used to set up the mode 'do not start if'for a desludge operation and is selected from a list(Light sludge, Ext trigger) 1 3 not usedP253Stop If select from listThis parameter is used to set up the mode 'stop if'for a desludge operation and is selected from a list(Light sludge, Ext trigger) 1 3 not usedP254 Start Time #1The time of day that the first desludge cycle starts 00:00 23:59 7:00P255 Interval #1The time interval for the first desludge cycle 00:00 23:59 1:00P256 Start Time #2The time of day that the second desludge cycle starts 00:00 23:59 00:00P257 Interval #2The time interval for the first desludge cycle 00:00 23:59 00:00P258 Max retries Not implementedP300 P Sensor Serial Number - - -User-settableP301 P Sensor Type - - -P302 dB Damping - - -34IP258