Aquarius Web Admin Guide

Chapter 8
Workflow Management
Adding a New Filter
1. Click on the Add New Tag Filter button. The Add New Tag Filter window will open
(see Figure 8.4 on page 8-4).
2. Enter a filter name that is unique.
Figure 8.4: Add New Tag Filter
3. Add filter rules by clicking the Add Rule button (see Figure 8.4). The Logical-AND
operator will be applied among rules within the filter. If necessary, remove a filter rule
entry by selecting the entry and clicking on the Remove button.
Figure 8.5: Add Rule to Tag Filter
4. Select a tag (see Figure 8.5 above), select an operator from the list, and enter the tag
value.
5. Add a description.
6. Click Save Tag Filter to add the tag filter.
AQ-NET-ADM-EN-4.4H 8-4