NOTICE

SECTION 3 CESSNA
ABNORMAL PROCEDURES MODEL 208B G1000
DISPLAY UNIT FAILURE
This is indicated by a complete loss of image on a display. If only
individual elements of the display are failed, refer to appropriate
procedures for the individual failures.
IF PFD
1. DISPLAY BACKUP Button . . . . . . . . . . . . . PRESS (if required)
Flight and EICAS information are displayed on the MFD.
NOTE
The PFD CDI SYNC and BARO SYNC settings must be ON
to allow the copilot’s PFD controls to affect settings on the
MFD. These settings are accessible using the PFD MENU
button.
2. Flight Director . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TRANSFER
((XFR button) to operating PFD)
3. FD Modes/AUTOPILOT . . . . . . RESELECT and REENGAGE
(as required)
4. Transponder . . . . . . . . . . . SWITCH (to operating transponder)
5. COM and NAV Radios. . . . . . . . . . . . . . . . . . . . . . . . . SWITCH
(to operating Com and Nav radios)
6. PFD Controls. . . . . . . . . . . . . . . . . . . . . USE OPERATING PFD
(for required data entry (Com, Nav, Baro setting, etc.)
IF MFD
1. Either DISPLAY BACKUP Button . . . . . . . . . . . . . . . . . PRESS
(EIS info will be displayed on PFDs)
3-58
U.S.
FAA APPROVED
208BPHBUS-01