NOTICE

CESSNA SECTION 8
MODEL 208B G1000 HANDLING, SERVICE, AND MAINTENANCE
CLEANING INSTRUCTIONS (Continued)
4. On acrylic windshields and windows, if soils which cannot be
removed by a mild detergent, Type II aliphatic naphtha applied
with a soft clean cloth may be used as a cleaning solvent. Be sure
to frequently refold the cloth to avoid redepositing soil and/or
scratching the windshield and windows with any abrasive
particles.
5. Rinse surface thoroughly with clean fresh water and dry with a
clean cloth.
CAUTION
Do not use any of the following on, or for cleaning,
windshields and windows: methanol, denatured
alcohol, gasoline, benzene, xylene, MEK, acetone,
carbon tetrachloride, lacquer thinners, commercial or
household window cleaning sprays. When in doubt
about any product, do not use it.
6. Hard polishing wax should be applied to acrylic surfaces. (The
wax has an index of refraction nearly the same as transparent
acrylic and will tend to mask any shallow scratches).
7. Acrylic surfaces may be polished using a polish meeting Federal
Specification P-P-560 applied per the manufacturer’s
instructions.
CAUTION
On acrylic surfaces, use only rain repellents that
conform to specification MIL-W-6882. Refer to the
Materials For Acrylic Windshields and Windows chart
for specific rain repellent products approved by Cessna.
NOTE
When applying or removing wax or polish, use a clean soft
cloth.
8. Windshields may have rain repellent applied per the
manufacturer’s instructions. Caution must be used not to get rain
repellent on painted surfaces surrounding the windshield.
208BPHBUS-00
U.S.
8-39