Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Setup Wizard<br />
After you log in, the Setup Wizard appears on the screen. It is recommended to<br />
follow the wizard if are setting up the network and configuring the Modem Router<br />
for the first time.<br />
1. Select a PVC (Permanent Virtual Circuit), then click Next.<br />
It is recommended to use the default setting, PVC0, when setting up the<br />
Modem Router for the first time.<br />
2. The information required on the page below can be obtained from your<br />
Internet service provider (ISP). Consult your ISP and do the following:<br />
a. Enter the Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI).<br />
b. Set the Encapsulation mode, ATMQoS, and Peak Cell Rate.<br />
c. Enable or disable Default VLAN and PPPoE PassThrough.<br />
d. Click Next to continue.