Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Protocol<br />
This section varies depending on the selected network protocol.<br />
PPPoE (RFC-2516 PPP over Ethernet)<br />
If you select PPPoE (Point-to-Point Protocol over Ethernet), the screen below is<br />
displayed.<br />
State of Connection — Select whether to enable or disable this connection.<br />
IPMode of Connection — Select the connection mode, options are:<br />
• Dynamic: Select Dynamic if the IP address can be automatically obtained<br />
from your ISP.<br />
• Static: Select Static if you are required to use a permanent IP address to<br />
connect to the Internet. You must enter the IP Address and Subnet Mask<br />
provided by your ISP.<br />
Name — Enter your desired connection name.<br />
NAT — Select whether to enable or disable NAT (Network Address Translation).<br />
Enable this setting to share one WAN IP address with multiple computers on your<br />
network.<br />
User Name — Enter the user name provided by your ISP.