TEW-658BRM(v1.0R)

Recommendations

Info

Multi-WAN DSL Auto Scan This page allows you to scan your DSL line for available VPI/VCI. To access the DSL Auto Scan page, click Advanced > Multi-WAN > DSL Auto Scan or click the DSL Auto Scan button. VPI/VCI Scanning Click the Scan button to start scanning your DSL line for available VPI/VCI. Scanning may take several minutes. Click the Cancel button to stop scanning. Current Auto-PVC Table Displays the current PVCs. Your Modem Router supports up to 8 PVCs. To modify an entry, do the following: 15. Click the icon. The selected entry is displayed on the editable field. 16. Enter the new VPI/VCI values. 17. Click the Save button.
IP/PPP Config This page allows you to create multiple Wide Are Networks (WAN) and manually add an IP or a PPP connection. To access the IP/PPP Config page, click Advanced > Multi-WAN > IP/PPP Config or click the WAN Config button. To add an IP or PPP connection, do the following: 18. Click the Add button of the connection that you want to add. 19. On the Interface field, select the PVC. 20. Enter the connection settings. The screen and the required settings vary depending on the type of connection that you want to add. See “Protocol” on page 21 for more information. 21. Click the Apply button to save your changes or click the Cancel button to discard your changes. To edit an IP or PPP connection, click the corresponding To delete an IP or PPP connection, click the corresponding Default Route icon. icon. This page allows you to change the default route of your Modem Router. To access the Default Route page, click Advanced > Multi-WAN > Default Route or click the Default Route button. Change Default Route — Select the connection to set as the default route from the drop-down list. Click the Apply button to save your changes or click the Cancel button to discard your changes.
Page 2 and 3: Table of Contents Product Overview
Page 4 and 5: Firewall ..........................
Page 6 and 7: Product Overview Thank you for choo
Page 8 and 9: Rear Panel No. Ports / Buttons Desc
Page 10 and 11: Installation Make sure that all dev
Page 12 and 13: Configure the Computer This section
Page 14 and 15: Windows Vista If you are using Wind
Page 16 and 17: Setup Wizard After you log in, the
Page 18 and 19: 5. Select whether to enable or disa
Page 20 and 21: provided by your ISP. The default V
Page 22 and 23: User Password — Enter the passwor
Page 24 and 25: DNS Server 1 and DNS Server 2 — I
Page 26 and 27: State of Connection — Select whet
Page 28 and 29: Bridge Mode If you select Bridge mo
Page 30 and 31: Wireless Mode — Select the wirele
Page 32 and 33: Group Rekey Time — Enter the numb
Page 34 and 35: DNS Relay — Select whether to ena
Page 36 and 37: Click the Apply button to save your
Page 38 and 39: To manually set the time and date o
Page 40 and 41: Name (SSID) — Select the SSID fro
Page 44 and 45: Advanced-LAN This page allows you t
Page 46 and 47: NAT Virtual Server A virtual server
Page 50 and 51: Firewall MAC Filter This page allow
Page 52 and 53: URL Filter This page allows you to
Page 54 and 55: Dos Protection Option — Check the
Page 56 and 57: Packet Filter Filters & Rules This
Page 58 and 59: Destination Start Port and Destinat
Page 60 and 61: IGMP Proxy IGMP proxy enables your
Page 62 and 63: Check the Enable box of the LAN int
Page 64 and 65: Quality of Service (QoS) Quality of
Page 66 and 67: the specified conditions in the cla
Page 68 and 69: To access the UPnP page, click ADVA
Page 72 and 73: Wan Interface — Select the interf
Page 74 and 75: Periodic Inform — When enabled, y
Page 76 and 77: 51. Select Module and Facility. 52.
Page 78 and 79: Click the Browse button and browse
Page 80 and 81: Diagnostics This page allows you to
Page 82 and 83: Click the Refresh button to refresh
Page 84 and 85: Traffic Data Interface The table li
Page 86 and 87: Appendix Regulatory & Safety Inform
Page 88 and 89: CE statement Europe - EU Declaratio
Page 90 and 91: Česky [Czech] Dansk [Danish] Deuts
Page 92 and 93:
Specifications Hardware Standards I
Page 94 and 95:
Limited Warranty TRENDnet warrants
show all

TEW-658BRM(v1.0R)

Create successful ePaper yourself

Delete template?

Save as template?