ES721 ISO40 7 kW NL - HSD

More documents

Recommendations

Info

HSD § 1 DOCUMENTS SUPPLIED WITH THE PRODUCT The documentation supplied with the product includes: � Manufacturer's declaration as provided for by Appendix IIB of Directive 2006/42/CE. � Product test certificate. � This manual, containing the instructions and warnings governing transport, installation, use and maintenance and final disposal of the product. i Check that all the above-mentioned documents are present at the moment the product is delivered. Copies can be obtained on request from HSD S.p.A. § 2 DOCUMENT INFORMATION This manual has been written by the Electrospindle department of the Technical Office at HSD S.p.A. for use by all the installers, operators and service engineers who work with the electrospindle. ISSUED BY HSD S.p.a Registered office: CODE REVISION APPROVED BY Via della Meccanica, 16; Loc. Chiusa di Ginestreto 61122 PESARO (PU) ITALY Factory headquarters: P.le A. de Simoni, sn 61122 PESARO (PU) ITALY 5801H0066 00 UTE008/05 List of updates Revision Modified paragraph Description 00 (22.07.2009) - - - New document 01 (29.07.2010) - - - General revision This manual is delivered as an essential part of the electrospindle and at the time of revision was the most up to date documentation on the product. For updates please visit our web sites or call HSD Customer Assistance Service (see above) This document is an English translation of the original manual HSD H5801H0066 written in Italian. In the case of any discrepancies between this translation and the original Italian document, reference should be made to the original version available on web site www.hsd.it, or from HSD Customer Assistance Service (see above). § 3 CUSTOMER ASSISTANCE SERVICE HSD S.p.A. Registered office: Via della Meccanica 16 61122 PESARO (PU) ITALY Loc. Chiusa di Ginestreto Factory headquarters: P.le A. De Simoni, sn 61122 PESARO (PU) ITALY Tel. (+39)0721.205.211 Fax (+39)0721.205.247 E-mail supporthsd@hsd.it Web www.hsd.it HSD Deutschland GmbH Brückenstrasse 32 D-73037 Göppingen DEUTSCHLAND Tel. +49(0)7161 / 956660 Fax +49(0)7161 / 9566610 E-mail supporthsddeut@hsddeutschland.de Web www.hsddeutschland.de HSD USA Inc. 3764 SW, 30 th Avenue Hollywood, Florida 33312 USA Phone no. (+1) 954 587 1991 Fax (+1) 954 587 8338 E-mail supporthsdusa@hsd.it Web www.hsdusa.com HSD Mechatronic Shangai Co. Ltd D2, First floor, 207 Taigu Road Waigaoquiao Free Trade Zone 200131, Shangai - China Phone no. (+86) 215866 1236 E-mail sales@hsd-china.cn Web www.hsd-china.cn 5801H0066 en Rev.01 4/48
HSD § 4 TERMS OF WARRANTY HSD S.p.A. guarantees that this electrospindle has been QC passed in testing in the factory. All work performed under the terms of the warranty shall be carried out at the premises of HSD S.p.A., with carriage at the Customer’s expense. HSD S.p.A. cannot accept any responsibility for production losses incurred as a result of work performed under the warranty. The warranty does not cover defects caused by the normal use of parts subject to continuous or rapid wear (e.g. seals, belts, bearings, etc.). In particular HSD S.p.A. offers no guarantee as to the duration of bearings, since bearing wear depends on various factors including: tool balancing precision, type of machining operation, impacts and/or mechanical stress in excess of the manufacturer’s declared limits. HSD S.p.A. declines all responsibility for non-compliance of the electrospindle caused by failure to follow the precautions and instructions given in this manual or by improper use or handling of the electrospindle. The Customer has the right to replacement of all parts shown to be defective, unless the said defects are caused by unauthorized tampering, including the fitting of non-original HSD spare parts and/or the replacement of parts not described or authorized in this manual unless authorized beforehand and in writing by HSD S.p.A.. In no case shall HSD S.p.A. or its suppliers accept any responsibility for damage (including damage to the unit, damage incurred for lost production and income, down-time in manufacturing, loss of information or other economic losses) deriving from the use of HSD products, even if HSD has been advised of such risks in advance. The warranty becomes automatically null and void if the Customer fails to notify HSD S.p.A. in writing of any faults found in the electrospindle within 15 days of their occurrence. The warranty likewise becomes null and void if the Customer fails to permit the seller to perform all necessary checks and tests, and if, when the seller requests the return of a defective part, the Customer fails to do so within two weeks of the request. Dimensioned drawings and photographs are provided only for information purposes and to facilitate understanding of text. HSD S.p.A. has a policy of constant development and improvement, and reserves the right to make functional and stylistic modifications to its products, to change the design of any functional or accessory part, and to suspend manufacturing and supply without notice and without obligation to third parties. Furthermore, HSD S.p.A. reserves the right to make any structural or functional change to the units, and to change the supply of spare parts and accessories without any prior notice. 5801H0066 en Rev.01 5/48
Page 1 and 2: HSD MECHATRONIC D I V I S I O N HSD
Page 3: HSD 10.7.2 Electrospindle states an
Page 7 and 8: HSD 5.3 RISKS ASSOCIATED WITH THE E
Page 9 and 10: HSD § 6 TRANSPORT, PACKAGING, UNPA
Page 11 and 12: HSD § 7 TECHNICAL SPECIFICATIONS 7
Page 13 and 14: HSD § 8 DIMENSIONS AND MAIN PARTS
Page 15 and 16: HSD 8.1.2 Direct liquid coolant cou
Page 17 and 18: HSD 8.1.3 Deublin distributor, enco
Page 19 and 20: HSD § 9 INSTALLAZIONE HSD S.p.a. d
Page 21 and 22: HSD DPC 5801H0066 en Rev.01 21/48 !
Page 23 and 24: HSD 9.7 COMPRESSED AIR SPECIFICATIO
Page 25 and 26: HSD 9.10 AUTOMATIC CONE CLEANING 1.
Page 27 and 28: HSD § 10 OPERATION 10.1 GENERAL PR
Page 29 and 30: HSD 10.7.2 Electrospindle states an
Page 31 and 32: HSD 10.10 CHOICE OF TOOLHOLDER CONE
Page 33 and 34: HSD 1 2 3 4 5 6 UTENSILE BLOCCATO U
Page 35 and 36: HSD 11.1 DAILY MAINTENANCE 11.1.1 C
Page 37 and 38: HSD § 12 REPLACEMENT OF COMPONENTS
Page 39 and 40: HSD 12.1.2 Replacement and adjustme
Page 41 and 42: HSD 12.1.5 Sensor S5 adjustment Aft
Page 43 and 44: HSD § 14 LIST OF SPARE PARTS CODE
Page 45 and 46: HSD The tool holder is not locked:
Page 47 and 48: HSD § 16 DECLARATION OF INCORPORAT

ES721 ISO40 7 kW NL - HSD

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?