Ursalink UR51 Industrial Cellular Router User Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>UR51</strong> <strong>User</strong> <strong>Guide</strong><br />
Port Setting<br />
Item<br />
Port<br />
Status<br />
Property<br />
Speed<br />
Duplex<br />
Description<br />
<strong>User</strong>s can define the Ethernet ports according to their needs.<br />
Set the status of Ethernet port; select "up" to enable and "down" to disable.<br />
LAN. <strong>User</strong> cannot change this setting.<br />
Set the Ethernet port's speed. The options are "auto", "1000 Mbps", "100<br />
Mbps", and "10 Mbps".<br />
Set the Ethernet port's mode. The options are "auto", "full", and "half".<br />
Table 4-2-1-1 Port Parameters<br />
4.2.1.2 LAN<br />
LAN setting is used for managing local area network devices which are connected to LAN<br />
port of the <strong>UR51</strong>, allowing each of them to access the Internet.<br />
Click to delete the existing LAN port setting. Click to add a new LAN port setting.<br />
LAN<br />
Figure 4-2-1-2<br />
Item Description Default<br />
Interface Select LAN port. FE 0<br />
IP Address Set IP address of LAN port. 192.168.1.1<br />
Netmask Set Netmask of LAN port. 255.255.255.0<br />
MTU<br />
Set the maximum transmission unit of LAN port.<br />
Range: 68-1500.<br />
Table 4-2-1-2<br />
1500<br />
Related Configuration Example<br />
LAN Management<br />
4.2.1.3 VLAN Trunk<br />
VLAN is a kind of new data exchange technology that realizes virtual work groups by logically<br />
dividing the LAN device into network segments.<br />
Client to delete the current VLAN setting. Click to add a new VLAN port.<br />
28