Ursalink UR51 Industrial Cellular Router User Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>UR51</strong> <strong>User</strong> <strong>Guide</strong><br />
L2TP<br />
Item<br />
Enable<br />
Remote IP Address<br />
<strong>User</strong>name<br />
Password<br />
Authentication<br />
Global Traffic<br />
Forwarding<br />
Remote Subnet<br />
Remote Subnet Mask<br />
Key<br />
Description<br />
Check to enable L2TP function.<br />
Enter the public IP address or domain name of L2TP server.<br />
Enter the username that L2TP server provides.<br />
Enter the password that L2TP server provides.<br />
Select from "Auto", "PAP", "CHAP", "MS-CHAPv1" and<br />
"MS-CHAPv2".<br />
All of the data traffic will be sent out via L2TP tunnel after this<br />
function is enabled.<br />
Enter the remote IP address that L2TP protects.<br />
Enter the remote netmask that L2TP protects.<br />
Enter the password of L2TP tunnel.<br />
Table 4-2-8-5 L2TP Parameters<br />
Figure 4-2-8-6<br />
Advanced Settings<br />
Item<br />
Local IP Address<br />
Peer IP Address<br />
Enable NAT<br />
Enable MPPE<br />
Address/Control<br />
Compression<br />
Description<br />
Set tunnel IP address of L2TP client. Client will obtain tunnel IP<br />
address automatically from the server when it's null.<br />
Enter tunnel IP address of L2TP server.<br />
Enable NAT traversal function.<br />
Enable MPPE encryption.<br />
For PPP initialization. <strong>User</strong> can keep the default option.<br />
61
Change language