Ursalink UR51 Industrial Cellular Router User Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>UR51</strong> <strong>User</strong> <strong>Guide</strong><br />
Global Traffic<br />
Forwarding<br />
Remote Subnet<br />
Remote Subnet Mask<br />
"MS-CHAPv2".<br />
All of the data traffic will be sent out via PPTP tunnel once enable<br />
this function.<br />
Set the peer subnet of PPTP.<br />
Set the netmask of peer PPTP server.<br />
Table 4-2-8-7 PPTP Parameters<br />
PPTP Advanced Settings<br />
Item<br />
Local IP Address<br />
Peer IP Address<br />
Enable NAT<br />
Enable MPPE<br />
Address/Control<br />
Compression<br />
Protocol Field Compression<br />
Asyncmap Value<br />
Description<br />
Figure 4-2-8-8<br />
Set IP address of PPTP client.<br />
Enter tunnel IP address of PPTP server.<br />
Enable the NAT faction of PPTP.<br />
Enable MPPE encryption.<br />
For PPP initialization. <strong>User</strong> can keep the default option.<br />
For PPP initialization. <strong>User</strong> can keep the default option.<br />
One of the PPP protocol initialization strings. <strong>User</strong> can keep<br />
the default value. Range: 0-ffffffff.<br />
MRU Enter the maximum receive unit. Range: 0-1500.<br />
MTU Enter the maximum transmission unit. Range: 0-1500.<br />
Link Detection Interval (s)<br />
Max Retries<br />
Expert Options<br />
Set the link detection interval time to ensure tunnel<br />
connection. Range: 0-600.<br />
Set the maximum times of retrying to detect the PPTP<br />
connection failure. Range: 0-10.<br />
<strong>User</strong> can enter some other PPP initialization strings in this<br />
field and separate the strings with blank space.<br />
Table 4-2-8-8 PPTP Parameters<br />
63