Ursalink UR51 Industrial Cellular Router User Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>UR51</strong> <strong>User</strong> <strong>Guide</strong><br />
(s)<br />
Interface Advanced Options<br />
Interface<br />
Network<br />
time should be increased before transmission the aging time of LSA.<br />
This configuration needs to be further considered on the low-speed<br />
link.<br />
Range: 1-65535<br />
Select interface.<br />
Select OSPF network type.<br />
Cost Set the cost of running OSPF on an interface. Range: 1-65535.<br />
Priority Set the OSPF priority of interface. Range: 0-255.<br />
Authentication<br />
Set the authentication mode that will be used by the OSPF area.<br />
Simple: a simple authentication password should be configured and<br />
confirmed again.<br />
MD5: MD5 key & password should be configured and confirmed again.<br />
Key ID It only takes effect when MD5 is selected. Range 1-255.<br />
Key<br />
The authentication key for OSPF packet interaction.<br />
Table 4-2-7-5 OSPF Parameters<br />
Figure 4-2-7-6<br />
Item<br />
Passive Interface<br />
Passive Interface<br />
Network<br />
IP Address<br />
Netmask<br />
Area ID<br />
Area<br />
Description<br />
Select interface from "cellular0", "FE0" and "FE1".<br />
The IP address of local network.<br />
The netmask of local network.<br />
The area ID of original LSA's router.<br />
51