Ursalink UR51 Industrial Cellular Router User Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>UR51</strong> <strong>User</strong> <strong>Guide</strong><br />
MIB View<br />
Network<br />
Read-Write<br />
Read-Only<br />
SNMP v3 <strong>User</strong> List<br />
Group Name<br />
Security Level<br />
Read-Only View<br />
Read-Write View<br />
Inform View<br />
Select an MIB view to set permissions from the MIB view list.<br />
The IP address and bits of the external network accessing the<br />
MIB view.<br />
The permission of the specified MIB node is read and write.<br />
The permission of the specified MIB node is read only.<br />
Set the name of SNMPv3 group.<br />
Select from "NoAuth/NoPriv", "Auth/NoPriv", and " Auth/Priv".<br />
Select an MIB view to set permission as "Read-only" from the<br />
MIB view list.<br />
Select an MIB view to set permission as "Read-write" from the<br />
MIB view list.<br />
Select an MIB view to set permission as "Inform" from the MIB<br />
view list.<br />
Table 4-3-3-3 VACM Parameters<br />
4.3.3.4 Trap<br />
This section explains how to enable network monitoring by SNMP trap.<br />
Figure 4-3-3-4<br />
SNMP Trap<br />
Item<br />
Enable<br />
SNMP Version<br />
Server Address<br />
Port<br />
Name<br />
Auth/Priv Mode<br />
Description<br />
Enable or disable SNMP Trap function.<br />
Select SNMP version; support SNMP v1/v2c/v3.<br />
Fill in NMS's IP address or domain name.<br />
Fill in UDP port. Port range is 1-65535. The default port is<br />
162.<br />
Fill in the group name when using SNMP v1/v2c; fill in the<br />
username when using SNMP v3.<br />
Select from "NoAuth & No Priv", "Auth & NoPriv", and<br />
"Auth & Priv".<br />
Table 4-3-3-4 Trap Parameters<br />
78
Change language