Ursalink UR51 Industrial Cellular Router User Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>UR51</strong> <strong>User</strong> <strong>Guide</strong><br />
Figure 4-2-8-2<br />
IPsec<br />
Item<br />
Enable<br />
IPsec Gateway Address<br />
IPsec Mode<br />
IPsec Protocol<br />
Local Subnet<br />
Local Subnet Netmask<br />
Local ID Type<br />
Remote Subnet<br />
Remote Subnet Mask<br />
Remote ID type<br />
Description<br />
Enable IPsec tunnel. A maximum of 3 tunnels is allowed.<br />
Enter the IP address or domain name of remote IPsec server.<br />
Select from "Tunnel" and "Transport".<br />
Select from "ESP" and "AH".<br />
Enter the local subnet IP address that IPsec protects.<br />
Enter the local netmask that IPsec protects.<br />
Select from "Default", "ID", "FQDN", and "<strong>User</strong> FQDN".<br />
Enter the remote subnet IP address that IPsec protects.<br />
Enter the remote netmask that IPsec protects.<br />
Select from "Default", "ID", "FQDN", and "<strong>User</strong> FQDN".<br />
Table 4-2-8-2 IPsec Parameters<br />
57
Change language