Ursalink UR51 Industrial Cellular Router User Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>UR51</strong> <strong>User</strong> <strong>Guide</strong><br />
Type<br />
Time<br />
Message<br />
Show the event type that should be alarmed.<br />
Show the alarm time.<br />
Show the alarm content.<br />
Table 4-3-6-1 Events Parameters<br />
4.3.6.2 Events Settings<br />
In this section, you can decide what events to record and whether you want to receive email<br />
and SMS notifications when any change occurs.<br />
Figure 4-3-6-2<br />
Event Settings<br />
Item<br />
Enable<br />
<strong>Cellular</strong> Up<br />
<strong>Cellular</strong> Down<br />
VPN Up<br />
VPN Down<br />
Record<br />
Email<br />
Email Setting<br />
SMS<br />
SMS Setting<br />
Phone Group List<br />
Description<br />
Check to enable "Events Settings".<br />
<strong>Cellular</strong> network is connected.<br />
<strong>Cellular</strong> network is disconnected.<br />
VPN is connected.<br />
VPN is disconnected.<br />
The relevant content of event alarm will be recorded on<br />
"Event" page if this option is checked.<br />
The relevant content of event alarm will be sent out via email if<br />
this option is checked.<br />
Click and you will be redirected to the page "SMTP" to<br />
configure the sender's & recipients' info.<br />
The relevant content of event alarm will be sent out via SMS if<br />
this option is checked.<br />
Click and you will be redirected to the page of "Phone" to<br />
configure phone group list.<br />
Select phone group to receive SMS alarm.<br />
Table 4-3-6-2 Events Parameters<br />
84
Change language