Ursalink UR51 Industrial Cellular Router User Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>UR51</strong> <strong>User</strong> <strong>Guide</strong><br />
Area ID<br />
Area<br />
No Summary<br />
Authentication<br />
Set the ID of the OSPF area (IP address).<br />
Select from "Stub" and "NSSA".<br />
The backbone area (area ID 0.0.0.0) cannot be set as "Stub" or<br />
"NSSA".<br />
Forbid route summarization.<br />
Select authentication from "simple" and "md5".<br />
Table 4-2--7-6 OSPF Parameters<br />
Area Advanced Options<br />
Item<br />
Area Range<br />
Area ID<br />
IP Address<br />
Netmask<br />
No Advertise<br />
Description<br />
Figure 4-2-7-7<br />
The area ID of the interface when it runs OSPF (IP address).<br />
Set the IP address.<br />
Set the netmask.<br />
Cost Range: 0-16777215<br />
Area Filter<br />
Area ID<br />
Filter Type<br />
ACL Name<br />
Area Virtual Link<br />
Area ID<br />
ABR Address<br />
Authentication<br />
Forbid the route information to be advertised among different<br />
areas.<br />
Select an Area ID for Area Filter.<br />
Select from "import", "export", "filter-in", and "filter-out".<br />
Enter an ACL name which is set on "Routing > Routing<br />
Filtering" webpage.<br />
Set the ID number of OSPF area.<br />
ABR is the router connected to multiple outer areas.<br />
Select from "simple" and "md5".<br />
Key ID It only takes effect when MD5 is selected. Range 1-15.<br />
Key<br />
Hello Interval<br />
The authentication key for OSPF packet interaction.<br />
Set the interval time for sending Hello packets through the<br />
52
Change language