Ursalink UR51 Industrial Cellular Router User Guide

UR51 User Guide
OpenVPN Client
Item
Enable
Protocol
Remote IP Address
Port
Interface
Authentication
Local Tunnel IP
Remote Tunnel IP
Global Traffic
Forwarding
Enable TLS
Authentication
Username
Password
Enable NAT
Compression
Link Detection Interval
(s)
Link Detection Timeout
(s)
Cipher
Description
Enable OpenVPN client. A maximum of 3 tunnels is allowed.
Select from "UDP" and "TCP".
Enter remote OpenVPN server's IP address or domain name.
Enter the listening port number of remote OpenVPN server.
Range: 1-65535.
Select from "tun" and "tap".
Select from "None", "Pre-shared", "Username/Password",
"X.509 cert", and "X.509 cert+user".
Set local tunnel address.
Enter remote tunnel address.
All the data traffic will be sent out via OpenVPN tunnel when
this function is enabled.
Check to enable TLS authentication.
Enter username provided by OpenVPN server.
Enter password provided by OpenVPN server.
Enable NAT traversal function.
Select LZO to compress data.
Set link detection interval time to ensure tunnel connection.
Range: 10-1800.
Set link detection timeout. OpenVPN will be reestablished after
timeout. Range: 60-3600.
Select from "NONE", "BF-CBC", "DE-CBC", "DES-EDE3-CBC",
"AES-128-CBC", "AES-192-CBC" and "AES-256-CBC".
MTU Enter the maximum transmission unit. Range: 128-1500.
Max Frame Size Set the maximum frame size. Range: 128-1500.
Verbose Level
Expert Options
Local Route
Subnet
Subnet Mask
Select from "ERROR", "WARING", "NOTICE" and "DEBUG".
User can enter some other PPP initialization strings in this field
and separate the strings with blank space.
Set the local route's IP address.
Set the local route's netmask.
Table 4-2-8-9 OpenVPN Client Parameters
4.2.8.7 OpenVPN Server
The UR51 supports OpenVPN server to create secure point-to-point or site-to-site
connections in routed or bridged configurations and remote access facilities.
65