Genisys User Guide - OTC

System Setup Functions
When you select System Setup from the Application Manager
screen (Figure 1.17 on page 6), the System Setup
screen appears, as shown below.
Figure 1.23: System Setup Screen - Graphic User Interface
Figure 1.24: System Setup Screen - Classic User Interface
1: General Information
Software Descriptions
This screen contains options for viewing information
about the scan tool and adjusting default settings for
the scan tool as follows:
USB Drive Tool Update — update the scan tool
software with files on a USB drive.
Contrast Adjust — adjust the contrast of the
LCD screen.
Printer Selection — select a printer for printing from
the scan tool.
Print Header — set up a heading for reports that you
print from the scan tool.
Unit Defaults — set the date, time, units-of-measure,
and automatic shut down time. It also lets you turn the
audible beep and print header functions on or off.
Revision Levels — view software version numbers.
Dial-Up Settings — set up IP addresses for communication
(wired or wireless) between the scan tool and
a PC or external device.
Technical Support — view technical support information.
User Interface Selection — set the scan tool main
screens to display options as either icons or menus.
Color Scheme Selection — set the color of the
background and text that appears on the screens.
Function Key Assignment — assign specific
applications to the function keys at the bottom of the
Application Manager screen.
Hardware Tests — test the LCD screen, keypad keys,
and beeper; view the time clock for the scan tool and
the scan tool’s serial number.
Language — set the default language for the scan tool
software.
Disk Usage — view details about the scan tool
memory size and usage.
File System Check — test the file system on the
memory card(s).
For more information, Refer to Setup and System
setup chapters;
Scan Tool User Guide 9