Genisys User Guide - OTC

Specifications
The Specifications option lets you view tune-up,
engine, and system specifications for a vehicle.
1 Follow the steps in Basic Procedure on page 49 to
display the Pathfinder screen (see Figure 8.1).
2 Select Specifications and press the ENTER key to
display the Specifications screen.
Figure 8.6: Specifications Screen
3 View the specifications and optionally print them.
Refer to Print on page 28.
4 Use the EXIT key to return to previous screens.
Component Location
8: Pathfinder
Specifications
The Component Location option lets you view a
description of the computer and connector locations
for a vehicle.
1 Follow the steps in Basic Procedure on page 49 to
display the Pathfinder screen (see Figure 8.1).
2 Select Component Location and press the ENTER
key. This displays the Component Location screen.
Figure 8.7: Component Location Screen
3 Select a component and press the ENTER key:
Connector Location - DLC location.
Computer Location - ECU location(s).
Fuse Box Location - fuse box location(s).
Figure 8.8: Component Location Screen Examples
4 View the description and optionally print it. Refer to
Print on page 28.
5 Use the EXIT key to return to previous screens.
Scan Tool User Guide 51