Genisys User Guide - OTC
Genisys User Guide - OTC
Genisys User Guide - OTC
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
8: Pathfinder<br />
The Pathfinder function lets you access the Pathfinder<br />
Quick-Path software functions from within the<br />
Scan Diagnostics applications. This option lets you<br />
view vehicle-specific information for some vehicles.<br />
NOTE: You can also access the Pathfinder functions by<br />
doing one of the following:<br />
From the Datastream screen, press the More<br />
function key and select the Pathfinder option.<br />
For details, refer to Pathfinder on page 27.<br />
From the DTC Information screen, press the<br />
Pathfinder function key. For details, refer to<br />
Read and Display Codes on page 37.<br />
Basic Procedure<br />
To access the Pathfinder functions, follow these<br />
steps:<br />
1 Follow the instructions in Test Startup and Vehicle<br />
Connection on page 14 to display the Diagnostic<br />
Menu screen.<br />
2 Select Pathfinder and press the ENTER key to<br />
display the Pathfinder screen (shown below).<br />
Figure 8.1: Diagnostic Menu Screen and Pathfinder Screen<br />
3 Select the item to view and press the ENTER key.<br />
4 Refer to the remaining sections in this chapter for<br />
specific instructions for each option on the Pathfinder<br />
screen.<br />
Repair Trac<br />
The Repair Trac option lets you access the Repair<br />
Trac software from within the Scan Diagnostic applications.<br />
The Repair Trac software contains repair<br />
instructions for hard-to-diagnose “pattern failures” on<br />
vehicles with 50,000 or more miles.<br />
NOTE: You can also access the Repair Trac software<br />
from the scan tool’s Repair Information menu. If you do<br />
this, you will need to enter the vehicle information again.<br />
1 Follow the steps in Basic Procedure to display the<br />
Pathfinder screen (see Figure 8.1).<br />
2 Select Repair Trac and press the ENTER key to<br />
display the Repair Trac Symptoms screen.<br />
3 From the list of symptoms, select a symptom to view<br />
and press the ENTER key. This displays the<br />
Problems and Fixes screen (shown below).<br />
Figure 8.2: Repair Trac Symptoms Screen and Repair Trac<br />
Problems and Fixes Screen<br />
NOTE: The RT (Repair Trac) Code on the screen<br />
is not a part of any diagnostic trouble code (DTC).<br />
4 View the description and optionally print it. Refer to<br />
Print on page 28.<br />
5 Use the EXIT key to return to previous screens.<br />
Scan Tool <strong>User</strong> <strong>Guide</strong> 49