Genisys User Guide - OTC
Genisys User Guide - OTC
Genisys User Guide - OTC
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Figure 4.22: Datastream Screen - LED Bar Displayed<br />
4 Notice the following about the LED bar:<br />
P/N is the park / neutral indicator<br />
TCC is the torque converter clutch indicator<br />
A/C is the air conditioning indicator<br />
Closed and Open are the operating loop indicators<br />
Rich and Lean are the O2 sensor indicators<br />
Show / Hide Analog<br />
4: Datastream<br />
Datastream Functions<br />
When analog gauges are displayed at the top of the<br />
Datastream screen, the Show / Hide Analog function<br />
on the More menu lets you temporarily hide the<br />
gauges or display them again.<br />
NOTE: To originally display analog gauges, or to entirely<br />
turn them off, refer to Graph / Analog / LED / Digital on<br />
page 24.<br />
To hide or show the analog gauges, follow these<br />
steps:<br />
Figure 4.23: Datastream Screen - Show / Hide Analog Function<br />
1 With the Datastream screen displayed, press the<br />
MORE function key.<br />
2 Use the Down Direction key to select the Hide<br />
Analog or Show Analog function.<br />
NOTE: This name of this menu option changes<br />
each time you select it. It changes back and forth<br />
between Hide Analog and Show Analog. Hide<br />
Analog temporarily removes the gauges and Show<br />
Analog displays the gauges again.<br />
3 Press the ENTER key.<br />
Scan Tool <strong>User</strong> <strong>Guide</strong> 31