D CDA3000 Inverter Drive System 750 W - 132 kW - Igor Chudov

2.1 Notes for
operation
2.2 Mounting
variants
CDA3000 Operation Manual
2 Mechanical installation
2.1 Notes for operation .................................................2-1
2.2 Mounting variants ...................................................2-1
2.3 Wall mounting .........................................................2-2
2.4 Cold plate ................................................................2-4
2.5 Push-through heat sink (Dx.x) ...............................2-7
Please ensure that ...
no damp enters the device
no aggressive or conductive substances are in the immediate vicinity
no drill chippings, screws or foreign bodies drop into the device
the vent openings are not covered over,
the drive controllers are not used in mobile equipment
The device may otherwise be damaged.
Step Action Comment
1
Refer to the name plate to find out the
mounting variant of your inverter module.
Name plate Mounting and cooling variant
CDA3...,Wx.x Wall
mounting
2-1
The mounting variants differ in
their mode of cooling.
Continued
on
Page 2-2
CDA3...,Cx.x Cold plate Page 2-4
Wx.x
CDA3...,Dx.x Push-through
heat sink
Table 2.1 Mounting and cooling variants
Cx.x
Dx.x
Page 2-7
1
2
3
4
5
A
DE
EN
FR
IT
ES
FR