D CDA3000 Inverter Drive System 750 W - 132 kW - Igor Chudov
D CDA3000 Inverter Drive System 750 W - 132 kW - Igor Chudov
D CDA3000 Inverter Drive System 750 W - 132 kW - Igor Chudov
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4.8 Operation with<br />
DRIVEMANAGER<br />
The key functions<br />
<strong>CDA3000</strong> Operation Manual<br />
Precondition:<br />
4 Commissioning<br />
DRIVEMANAGER user software version V3.1 or higher installed on the<br />
PC.<br />
X1<br />
ACHTUNG<br />
Kondensatorentladezeit<br />
>3 Min.<br />
Betriebsanleitung<br />
beachten!<br />
WARNING<br />
capacitor disscharge<br />
time >3 minutes.<br />
Pay attention to the<br />
operation manual!<br />
ATTENTION<br />
temps de decharge<br />
du condensteur<br />
>3 min. observer le<br />
mode dèmploi!<br />
!<br />
H1 H2 H3<br />
X4<br />
X2<br />
X3<br />
X4<br />
RS232<br />
3 m max.<br />
CCD-SUB90X<br />
RS232<br />
Figure 4.6 <strong>Inverter</strong> module connection to PC/DRIVEMANAGER<br />
For more information refer to the DRIVEMANAGER Manual.<br />
4-18<br />
DRIVE<br />
MANAGER<br />
Icon Function Menu<br />
Change setting of active<br />
device<br />
Active device > Change settings<br />
Print parameter data set Active device > Print settings<br />
Digital scope<br />
Control drive<br />
Connect to device<br />
Bus initialization,<br />
change setting<br />
Active device > Monitoring > Quickly<br />
changing digital scope values<br />
Active device > Open-loop control ><br />
Basic operation modes<br />
Communication > Connect > Single<br />
device<br />
Communication> Bus configuration<br />
Disconnect all devices Communication > Disconnect<br />
Save data set of active device<br />
to file<br />
Data set transfer from file to<br />
active device<br />
Active device > Save device settings to<br />
Active device > Load device settings<br />
from
Change language