D CDA3000 Inverter Drive System 750 W - 132 kW - Igor Chudov
D CDA3000 Inverter Drive System 750 W - 132 kW - Igor Chudov
D CDA3000 Inverter Drive System 750 W - 132 kW - Igor Chudov
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3.8.5 Terminal<br />
assignment 3<br />
<strong>CDA3000</strong> Operation Manual<br />
3 Installation<br />
Preset solution “Analog reference + correction, with rotary encoder”.<br />
Features Parameter<br />
Analog speed input for two<br />
directions with speed correction<br />
Encoder evaluation<br />
N2<br />
M<br />
3~<br />
R2<br />
K0<br />
(1)<br />
R1<br />
≥ 10 kΩ<br />
+24V<br />
H2<br />
H1<br />
STL<br />
STR<br />
ENPO<br />
0 ... 10 V<br />
N1<br />
≥ 10 kΩ<br />
-<br />
+<br />
B<br />
A<br />
+<br />
-<br />
(1) Only encoder type HTL (24V supply) usable. The encoder is evaluated only in control<br />
mode FOR. For notes on the rotary encoder see Figure 3.10.<br />
Figure 3.9 Control terminal assignment, rotational drive with encoder<br />
evaluation<br />
Correction reference*: For a description of the function refer to the<br />
<strong>CDA3000</strong> Application Manual.<br />
3-18<br />
152-ASTER = ROT_2<br />
X2 Des. Function<br />
20 OSD02 14<br />
Relay contact<br />
19 OSD02 11 for “Ready”<br />
18 OSD02 12<br />
message<br />
17 DGND Digital ground<br />
16 OSD01 “Reference reached” message<br />
15 OSD00 “Standstill” message<br />
14 DGND Digital ground<br />
13 U V Auxiliary voltage 24 V<br />
12 ISD03 Encoder track B<br />
11 ISD02 Encoder track A<br />
10 ISD01 Start/Stop anti-clockwise<br />
9 ISD00 Start/Stop clockwise<br />
8 ENPO Power stage hardware enable<br />
7<br />
6<br />
UV UV Auxiliary voltage 24 V<br />
5 OSA00 Actual frequency 0 ... FMAX<br />
4 AGND Analog ground<br />
3 ISA01 Correction reference* 0 V ... +10 V<br />
2 ISA00 Reference 0 V ... + 10 V<br />
1 U R Reference voltage 10.5 V, 5 mA