D CDA3000 Inverter Drive System 750 W - 132 kW - Igor Chudov
D CDA3000 Inverter Drive System 750 W - 132 kW - Igor Chudov
D CDA3000 Inverter Drive System 750 W - 132 kW - Igor Chudov
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3. Motor data...<br />
<strong>CDA3000</strong> Operation Manual<br />
4 Commissioning<br />
By way of the automatic motor identification the characteristic data of IEC<br />
standard motors and ASM servomotors can be determined. The<br />
precondition for problem-free identification is that the rating plate data are<br />
present and correctly entered.<br />
Note: The data of the motor nominal point (max. rated power output<br />
of the motor) must always be entered. In 87 Hz applications<br />
(motor: 230 V, delta configuration) the converted 87 Hz data<br />
must be entered. For more information refer to the <strong>CDA3000</strong><br />
Application Manual.<br />
For our example this setting is required.<br />
Following identification of the motor, all control loops are automatically<br />
computed and the necessary parameter adjustments made.<br />
Precondition:<br />
The motor is connected.<br />
Hardware enabled ( = ENPO contact closed).<br />
1<br />
3<br />
2<br />
Step Action Note<br />
1 Enter motor data see your motor type designation<br />
2 Click on “Start identification” button Takes approx. 3 min.<br />
3 Apply setting Values are transferred to device<br />
4 Re-open ENPO contact on device<br />
Motor identification is complete<br />
Power stage safely disabled<br />
4-8