20.01.2013 Views

Tactics, techniques, and procedures for - Army Electronic ...

Tactics, techniques, and procedures for - Army Electronic ...

Tactics, techniques, and procedures for - Army Electronic ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

FM 42-414<br />

• After operations --<br />

3-30<br />

•• Check <strong>for</strong> fuel leaks.<br />

•• Inspect fuel lines, connections, fuel tank, <strong>and</strong> filter.<br />

•• Check instruments <strong>for</strong> broken lenses <strong>and</strong> loose connections.<br />

•• Inspect wiring to see if insulation is cracked or worn <strong>and</strong> if connections are loose.<br />

CAUTION<br />

Be<strong>for</strong>e servicing any part of the generator set, personnel must make sure the<br />

engine has been turned off.<br />

Water Heater Maintenance. The shower equipment operators must per<strong>for</strong>m the following<br />

maintenance checks <strong>and</strong> services:<br />

• Be<strong>for</strong>e operations --<br />

• During operations --<br />

•• Check the nozzle <strong>and</strong> electrode holder on the burner <strong>for</strong> secure mounting. Ensure<br />

that connections on the lead assemblies are secure.<br />

•• Ensure that the blower shutter operates freely <strong>and</strong> check the blower mounting.<br />

•• Check the line connections on the fuel pump. Prime the pump <strong>and</strong> check it <strong>for</strong> leaks.<br />

•• Be sure their are no broken lenses on any instruments <strong>and</strong> that connections are<br />

secure.<br />

•• Check motor rotation of pump <strong>and</strong> burner. If the motor rotation is incorrect, change<br />

or reverse the motor’s two power leads.<br />

•• Check the operation of all valves <strong>and</strong> controls.<br />

•• Be sure the exhaust duct is properly connected <strong>and</strong> without any breaks or leaks.<br />

•• Check sight glass <strong>for</strong> steady flame.<br />

•• Check hoses <strong>for</strong> water leaks <strong>and</strong> to see that they are not twisted.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!