Reocor S - BIOTRONIK USA - News

64 Operating Notes
English
Designation
1 Patient connection
INDIFF.+; DIFF.-
Function
For cables with 2-mm plug
or for Redel adapters
(red = plus; blue = minus)
2 Battery compartment For 9-V block battery
3 Low battery LED Provides a warning when the battery voltage is too low
4 LED Pace Yellow display for stimulated event
5 LED Sense Green display for sensed event
6 Ampl. control dial Setting the pulse amplitude
7 Sens. control dial Setting the sensitivity
8 Start burst Starting the burst function
9 Velcro harness Secures Reocor S to patient, bed or infusion stand
10 Burst rate control dial Setting the burst rate
11 Select burst Selection of the burst function
12 Rate control dial Setting the pacing rate
13 Mode dial Selection of the pacing mode and off switch
Table 1: Description of elements in Figure 1
Bold labels of the operating devices indicate safe
values for the intended use of the device.
Protective Cover
The protective cover is locked when the cover has
been pushed to the stop, passing two snap-in points
and when the lever is resting on the rail (see Figure 2).
Correct:
False:
Figure 2: Correct positioning of the protective cover