Register and win! WRP 10000 WRP 20000 - Kärcher

Monitoring and regulating equipment
Float switch in the recycled water tank
S7 up Recycled water tank full. Filling process is stopped.
S7 down Recycled water tank is filled.
S9 up Switching off the fresh water supply. Indicator lamp "Fresh water supply active" goes off.
Illuminated lamp "Fresh water supply was active" lights up yellow.
S9 down Switching on the fresh water supply. Indicator lamp "Fresh water supply active" and
"Fresh water supply was active" lights up yellow.
S11 up Dry run protection for wash pump not active, no error message.
S11 down Dry run protection for wash pump active, error message on the washing system.
Floater switch in the pump basin
The bases of a safe operating of the equipment
is thr regularly maintenance according
to the following maintenance plan.
Use only original parts of the manufacturer
or part suggessted by him, such as
– parts and wearing parts,
– accessories parts,
– operating materials,
– cleaning agents.
Danger
Risk of accident while working on the unit.
During all tasks
Deenergize the system: Pull the mains
plug and secure the system against being
switched back on.
Shut off water supply.
S5 top Pump basin overfilled. Starting the disposal via the recycling water tank into the channel
S5 bottom Pump basin is not overfilled, normal system operation.
S4.1 top Pump basin is not sufficiently filled, normal system operation.
S4.1 bottom no function
S4.2 top no function
S4.2 bottom Pump basin empty, dry run protection of immersion pump active, no filtration, no backwash
possible. System runs on fresh water.
Technical specifications
Who may perform maintenance?
– Operator
Work designated with the sign “Operator”
may only be carried out by persons
who have been instructed in the safe
operation and maintenance on washing
systems with recycling unit.
– Customer Service
Work designated with the sign “Customer
Service” may only be done by the
fitters of Kärcher Customer Service.
Maintenance contract
In order to guarantee a reliable operation
og the equipment, we success, you signed
a maintenance agreement. Please refer to
you local Kärcher service department.
- 6
WRP 10000
1.217-130.0
WRP 20000
1.217-140.0
Immersion pump Motor output W 1300 1700
Voltage V 230/1~ 230/1~
Power consumption A 5,9 8,5
Flow rate at approx. 0.1 MPa (1 bar) m 3 /h approx. 10 approx. 20
Pressure MPa (bar) max. 0.14 (1.4) max. 0.16 (1.6)
Entire unit Filter capacity m 3 /h max. 10 max. 20
Voltage V 230/1~ 230/1~
Frequency Hz 50 50
Weight kg 280 390
Width mm 700 900
Depth mm 620 780
Height mm 1600 1600
Maintenance and care
Maintenance instructions
18 EN