Samsung i70 - User Manual_7.56 MB, pdf, ENGLISH
Samsung i70 - User Manual_7.56 MB, pdf, ENGLISH
Samsung i70 - User Manual_7.56 MB, pdf, ENGLISH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Connecting to a Power Source<br />
CAUTION<br />
Before inserting any cables or AC adapter, check the directions and do not<br />
insert by force. It may cause breakage of cable or camera.<br />
If the charging LED of the AC Charger does not turn on or blink after<br />
inserting the rechargeable battery, please check whether the battery is<br />
inserted correctly.<br />
If you charge the battery with the camera power on, the battery can't charge<br />
fully. Turn the camera off while charging the battery.<br />
Insert the battery as shown<br />
- If the camera does not turn on after you<br />
have inserted battery, please check<br />
whether the battery is inserted with the<br />
correct polarity (+ / -).<br />
- When the battery chamber cover is<br />
opened, do not force the battery chamber<br />
cover. This may damage it.<br />
There are 4 indicators for battery condition that are displayed on the LCD monitor.<br />
Charging LED of the AC Adapter<br />
Being Charged<br />
Charging is complete<br />
Charging error<br />
Being discharged<br />
(Using the AC adapter)<br />
Charging LED<br />
Red LED is on<br />
Green LED is on<br />
Red LED is off or blinking<br />
Orange coloured LED is on<br />
If you insert the fully discharged battery to charge it, do not turn on the camera at<br />
the same time. The camera may not be turned on because of the low battery<br />
capacity. Charge the battery for more than 10 minutes before using the camera.<br />
Do not use the flash frequently or take a movie clip with the fully discharged<br />
battery charged for a short time. Even if the charger is inserted, the camera<br />
power may be turned off because the rechargeable battery is discharged again.<br />
Battery indicator<br />
Battery status<br />
The battery is<br />
fully charged<br />
Low battery capacity<br />
(Prepare to recharge<br />
or use spare battery)<br />
Inserting the memory card<br />
Insert the memory card as shown.<br />
- Turn off the camera’s power before<br />
inserting the memory card.<br />
- Have the front of the memory card facing<br />
toward the back of the camera (LCD<br />
monitor) and the card pins toward the front<br />
of the camera (Lens).<br />
- Do not insert the memory card the wrong<br />
way round. Doing so may damage the<br />
memory card slot.<br />
Low battery capacity<br />
(Prepare to recharge<br />
or use spare battery)<br />
Flat battery.<br />
Recharge or use<br />
spare battery.<br />
11