floppy-isdn4linux Version 3.6.2 - Fli4l

A. Anhang zum Basispaket
inserted in and removed from the running kernel whenever you want).
The module will be called ibmtr.o. If you want to compile it as a
module, say M here and read .
IBM Olympic chipset PCI adapter support
CONFIG_IBMOL
This is support for all non-Lanstreamer IBM PCI Token Ring Cards.
Specifically this is all IBM PCI, PCI Wake On Lan, PCI II, PCI II
Wake On Lan, and PCI 100/16/4 adapters.
If you have such an adapter, say Y and read the Token-Ring
mini-HOWTO, available from .
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called olympic.o. If you want to compile it
as a module, say M here and read .
Also read or check the
Linux Token Ring Project site for the latest information at
.
IBM Lanstreamer chipset PCI adapter support
CONFIG_IBMLS
This is support for IBM Lanstreamer PCI Token Ring Cards.
If you have such an adapter, say Y and read the Token-Ring
mini-HOWTO, available from .
This driver is also available as a modules ( = code which can be
inserted in and removed from the running kernel whenever you want).
The modules will be called lanstreamer.o. If you want to compile it
as a module, say M here and read .
Generic TMS380 Token Ring ISA/PCI/MCA/EISA adapter support
CONFIG_TMS380TR
This driver provides generic support for token ring adapters
based on the Texas Instruments TMS380 series chipsets. This
includes the SysKonnect TR4/16(+) ISA (SK-4190), SysKonnect
TR4/16(+) PCI (SK-4590), SysKonnect TR4/16 PCI (SK-4591),
Compaq 4/16 PCI, Thomas-Conrad TC4048 4/16 PCI, and several
Madge adapters. If you say Y here, you will be asked to select
which cards to support below. If you’re using modules, each
class of card will be supported by a separate module.
If you have such an adapter and would like to use it, say Y and
read the Token-Ring mini-HOWTO, available from
.
347