【User Manual】 Lite-Puter Enterprise Co., Ltd. - Notape

More documents

Recommendations

Info

ISO 9001 CERTIFIED www.liteputer.com.tw LITE-PUTER CX-18 Ver1.0 BANK:01 EDIT MODE, SELECT ITEM F1: ‘FIX’ FOR CONFIG FIXTURE F2: ‘SHOW’ FOR SHOE EDIT F3: ‘STROBE’ FOR STROBE SC F4: ‘SMOKE’ FOR SMOKE SC F5: ‘SPOT’ FOR SPOT SC F6: ANY SC KEY FOR COMMON SC USE HOT KEY SELECT TIME INTER MEMORY 08/01/2008 STEP-2 Press【SHOW】and LCD display as below, LITE-PUTER CX-18 Ver1.0 BANK:01 BANK: 01 SHOW:01 display01-18 display01-18 [STEP1] SEL. EDIT BANK & SHOE NO [STEP2] THEN PRESS’ENT’ INTER MEMORY 08/01/2008 10:08 STEP-3 Press BANK NO. (1~18) and SHOW NO.(1~18) to select the BANK and SHOW need to edit (for example, set BANK as 12 and SHOW as 18), LCD display as below, It means edit the SHOW 18 under BANK12.(Select BANK NO. first and then select SHOW NO.) STEP-4 Press【ENTER】to enter SHOW edit menu and LCD displays as below, 23 Reminder Reminder Lite-Puter CX-18 [EUM-D]
SHOW step is empty. ISO 9001 CERTIFIED www.liteputer.com.tw LITE-PUTER CX-18 Ver1.0 BANK: 12 SHOW:18 FAND : 0.1S WAIT:0.1S SPEED:0.1S SIZE:000% SCENE:EMPTY MACRO:OFF ’ENTER’FOR’FADE/WAIT/SPEED/ANGLE’S E. ’PREV’ TO PREVIEW PREGRAMED SHOW INTER MEMORY 08/01/2008 Attention: FADE/WAIT/SPEED’s value can range from 0.1S to 25.5S. Size’s value can range from 000% to 100%. MACRO has 5 operate modes: OFF/PAN/TILT/CIRC/-CIRC SCENE can range from 1 to 32 steps. STEP-5 Press【P1—P18 FIXTURE NO.】to select any moving light need to edit. (The LED on P1—P18 will turn on when the correspond moving light is selected) For example: FADE TIME set as: 22.2S WAIT TIME set as: 18.6S SPEED TIME set as: 18.6S SIZE set as: 88% MACRO set as: PAN SCENE: SHOW step as 8 steps STEP-6 Press【ENTER】to select FAND/WAIT/SPEED. When FADE is selected, it displays as 0.1S, and move【FADE TIME PITCH】 FADER to change FADE TIME as 22.2S, LCD displays as below, 24 min. value: 0.1S and 000% Moving light operate mode Reminder Lite-Puter CX-18 [EUM-D]
Page 1 and 2: ISO 9001 CERTIFIED www.liteputer.co
Page 5 and 6: Chapter 1 1-1 Feature ISO 9001 CERT
Page 23: ISO 9001 CERTIFIED www.liteputer.co
Page 31 and 32: 3-5-1 INSERT STEP ISO 9001 CERTIFIE
Page 41 and 42: 3-7-1 SMOKE Recall ISO 9001 CERTIFI
Page 43 and 44: 3-8-1 SPOT Recall ISO 9001 CERTIFIE
Page 45 and 46: 100 % 0s ISO 9001 CERTIFIED www.lit
Page 65 and 66: 4. BANK—〉BANK ISO 9001 CERTIFIE
Page 75 and 76:
ISO 9001 CERTIFIED www.liteputer.co
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
5-9 Copy a bank ISO 9001 CERTIFIED
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
5-12 SD card Press【func.】 ISO 9
Page 93 and 94:
show all

【User Manual】 Lite-Puter Enterprise Co., Ltd. - Notape

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?