【User Manual】 Lite-Puter Enterprise Co., Ltd. - Notape

ISO 9001 CERTIFIED www.liteputer.com.tw
5-10-1 Programming a show with macro
Action Explain
Press and hold【EDIT】for 3 seconds→press
【SHOW】
→Press Bank 2→press show 5→press【Enter】
[ BANK:02 SHOW:01 ]
[ FADE: 2.0S WAIT: 2.S ]
[ SPEED:0.1S SIZE:052% ]
[ SCENE:EMPTY MACRO:OFF ]
→press and hold P1 through P4→Slide no.1fader
to full→press 【FINE】→play Joystick to a
position play
[ BANK:02 SHOW:01 ]
[ FADE: 2.0S WAIT: 2.S ]
[ SPEED:0.1S SIZE:052% ]
[ SCENE: EMPTY MACRO:OFF ]
Slide pitch fader in 3 sec.
[ BANK:02 SHOW:02 ]
[ FADE: 3S WAIT: 2.S ]
[ SPEED:0.1S SIZE:000% ]
[ SCENE: EMPTY MACRO:CIRC ]
→press 【ENTER】
Slide pitch fader in 3 sec.
[ BANK:02 SHOW:02 ]
[ FADE: 3S WAIT: 3S ]
[ SPEED:0.1S SIZE:000% ]
[ SCENE: EMPTY MACRO:CIRC ]
→press 【ENTER】
Slide speed in 1 sec.
[ BANK:02 SHOW:02 ]
[ FADE: 3S WAIT: 3S ]
[ SPEED: 1S SIZE:000% ]
[ SCENE: EMPTY MACRO:CIRC ]
→Slide 【RANGE】to 80%
→Press[ADD]
[ BANK:02 SHOW:02 ]
[ FADE: 3S WAIT: 3S ]
[ SPEED: 1S SIZE: 081% ]
[ SCENE: 01, 01 MACRO:CIRC ]
Program a show 5 in bank 2 with 3 step
Enter editor mode→select show editor mode.
Select the show 5 in the bank2 to be editor
The default values.
Select first through 4 th fixture →set the 4 lamp on to
full →set the a PAN/TILT value to 50%,use Joystick
set a propriety position 。
Set the fade time in 3second
Change the cursor to wait time
Set the wait time in 3second
Change the cursor to SPEED time
Set the speed time in 1 second
Change the VALUE to 80%
Add a step and save .
Play back the show
84
Lite-Puter
CX-18 [EUM-D]