【User Manual】 Lite-Puter Enterprise Co., Ltd. - Notape

ISO 9001 CERTIFIED www.liteputer.com.tw
STEP-5 After setting, press 【ENTER】to save it to ACTIVE STROBE SC and automatically
enter INTIVE STROBE SC setting, LCD displays as below,
LITE-PUTER CX-18 Ver1.0 BANK:01
STEP-6 INACTIVE STROBE SC’s setting is same as that of ACTIVE STROBE SC.
3-6-1 STROBE Recall
SETUP BANK: 12 INTIVE STROBE SC
release
【STROBE】
PRESS ‘ENT’ SETUP (IN) ACTIVE SC
INTER MEMORY 08/01/2008 10:08
After STROBE setting, press【ESC】2 times to enter the home page.
First select BANK NO. and press【STROBE】to recall ACTIVE STROBE SC and then release
【STROBE】to recall INACTIVE STROBE SC.
3-7 SMOKE Setting/Recall
Introduction: SMOKE has 2 scene modes.
Press【SMOKE】to recall ACTIVE SMOKE SC;
Release【SMOKE】to recall INTIVE SMOKE SC;
STEP-1 On the home page, press【EDIT】 for 3 seconds and LCD displays the function menu,
37
Reminder
Lite-Puter
CX-18 [EUM-D]