【User Manual】 Lite-Puter Enterprise Co., Ltd. - Notape

More documents

Recommendations

Info

5-3 Fixture set up ISO 9001 CERTIFIED www.liteputer.com.tw Action Explain In home page Press and hold【EDIT】for 3 seconds→ Press【Fixture】 Press【Bank1】→press and hold P1 through P4 → press 【Enter】 Slide the fader 8 → press【►】 [→PAN CHANNEL (+)=08 (MAC SEL’+ -‘ ] Slide the fader 9 → press【►】 [→TILT CHANNEL (+)=08 (MAC SEL’+ -‘ ] Slide the fader 1 → press【►】[→DIMMER CHANNEL =01] Set the 4 fixture in the same set up Enter editor mode→ enter fixture config selector menu to set up. select【Bank1】→Select the Fixture 1 through Fixture 4. (Set up the 4 fixtures at the same time. Enter fixture config mode. press and hold can be select a serial numbers of fixture Specify the pan channel by moving the fader 8→ save & press to next . Specify the tilt channel by moving the fader 9→ save & press to next . Specify the dimmer/intensity channel by moving the fader 1 → save & press to next . Slide the MASTER fader set a value Specify the minimum dimmer intensity value by the [→DIM CH MIN VAL =000%] MASTER FADER value (you can set any value you want, usually set in 0 ) → press【►】 → save & press to next . Slide the MASTER fader set a value Specify the maximum dimmer intensity value by the [→DIM CH MAX VAL =100%] MASTER FADER value (you can set any value you want, usually set in 100 ) → press【►】 → save & press to next . Press【Enter】 save & finish & go back to config selector menu to select the Fixture function Set 3,4 fixture reverse pan press and hold P3 through P4→ press 【Enter】 press【MACRO】→press 【Enter】 [→PAN CHANNEL (-)=08 (MAC SEL’+ -‘ ] Select the Fixture 3 through Fixture 4. (Set up the 2 fixtures at the same time. Enter fixture config mode Specify the pan channel reverse. → Save &finish set up go back config selector menu →press 【ESC】→press 【ESC】 →Back to editor mode→Back to home page In home page [ SELECT SHOW TO RUN ] Press bank 1 →Press【FIXTURE】→ press and hold P1 through P4→Slide the fader 1 to full Test the fixture In the home page Select bank 1 , → in the fixture mode. → Select the fixture 1 through 4 →put the lamp on Play Joystick go around Play the 4 fixture to go, see no. 1, 2 and 3, 4 goes 75 Lite-Puter CX-18 [EUM-D]
ISO 9001 CERTIFIED www.liteputer.com.tw different. →press 【FIXTURE】→press 【ESC】 →release to clean the stage. * Put the Fixture set up only in this bank only, if you want play other bank with the same set up .You may do the bank copy to make a quickly set up for other. * When you do the bank copy ,all the [SMOKE]、[STROBE]、[SPOT] will copy to that bank too. 76 Lite-Puter CX-18 [EUM-D]
Page 1 and 2:
ISO 9001 CERTIFIED www.liteputer.co
Page 3 and 4:
Page 5 and 6:
Chapter 1 1-1 Feature ISO 9001 CERT
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26: SHOW step is empty. ISO 9001 CERTIF
Page 27 and 28: ISO 9001 CERTIFIED www.liteputer.co
Page 31 and 32: 3-5-1 INSERT STEP ISO 9001 CERTIFIE
Page 41 and 42: 3-7-1 SMOKE Recall ISO 9001 CERTIFI
Page 43 and 44: 3-8-1 SPOT Recall ISO 9001 CERTIFIE
Page 45 and 46: 100 % 0s ISO 9001 CERTIFIED www.lit
Page 65 and 66: 4. BANK—〉BANK ISO 9001 CERTIFIE
Page 75: ISO 9001 CERTIFIED www.liteputer.co
Page 83 and 84: 5-9 Copy a bank ISO 9001 CERTIFIED
Page 91 and 92: 5-12 SD card Press【func.】 ISO 9
show all

【User Manual】 Lite-Puter Enterprise Co., Ltd. - Notape

Create successful ePaper yourself

Delete template?

Save as template?