【User Manual】 Lite-Puter Enterprise Co., Ltd. - Notape

More documents

Recommendations

Info

ISO 9001 CERTIFIED www.liteputer.com.tw [ SELECT SHOW TO RUN ] Off the show Press【SHOW】→ →press show function to turn off show mode (show1 is out, but only turn off the intensity ). Press【SHOW】→ Come back the show1 Press show2,scene2 in the same time Come in those together , it will change by itself Call sever shows come in together Press and hold show1,add press show3 There are show1,show2,show3 and scene1 on stage * Scene do not have to run in show mode 5-11-1 Pause to a show and scene Pause the show Put the pitch fader to half way in the fader. During the show those two fade have to set this for Put the range fader to half way in the fader. the default setting in this control. In the home page [ SELECT SHOW TO RUN ] In the home page Press Bank 2 Select bank 2 , →press show function→run the Press【SHOW】→ Press【SHOW1】 show1 . →Press【MACRO】 Pause the show →【►】 →Go next step →【w】 →Go back previous. →Press【MACRO】 Release the pause of the show. 5-11-2 changing the Rate of a show In the home page [ SELECT SHOW TO RUN ] Press Bank 2 Press【SHOW】→ Press SHOW 1, SCENE 1 Slide the pitch & range fader up Slide the pitch & range fader down Reduce the speed of the show and the scene In the home page Select bank 2 , →press show function→run the show1 . Slide up will going up the speed. Slide down will slow down the speed. * Pitch is fade time ,Range is wait time 。You can try to adjust them together or separate ,when the music is change you do not have time to editor the timing. 89 Lite-Puter CX-18 [EUM-D]
5-12 SD card Press【func.】 ISO 9001 CERTIFIED www.liteputer.com.tw Action Explain Copy inter memory to SD card →[ F1:INTER COPY SHOW→SHOW] [F2:DEL INTER SHOW MEM] [F3:INTER COPY SC→SC] [F4:DEL INTER SC MEM] [F5:INTER COPY BANK→BANK] [F6:DEL INTER BANK MEM] [F7:INITINAL SYSTEM] [F8:COPY SD→INTERMEMORY] [F:9COPY INTERMEMORY→SD] [F:10SETUP SYSTEM CLOCK] [F:11SD CARD CHECK ON/OFF] Press【►】11 time [ F1:INTER COPY SHOW→SHOW] [F2:DEL INTER SHOW MEM] [F3:INTER COPY SC→SC] [F4:DEL INTER SC MEM] [F5:INTER COPY BANK→BANK] [F6:DEL INTER BANK MEM] [F7:INITINAL SYSTEM] [F8:COPY SD→INTERMEMORY] [F9:COPY INTERMEMORY→SD] [F10:SETUP SYSTEM CLOCK] →[F11:SD CARD CHECK ON/OFF] →Press【ENTER】ON/OFF [ SD CARD CHECH ON/OFF] [ OFF ON ] Enter function menu→ Chose chow copy functions Select the F11: SD card check function Into SD card menu →Press【►】[ OFF ON ] Move cursor to select on →Press【ENTER】 →[ F1:INTER COPY SHOW→SHOW] [F2:DEL INTER SHOW MEM] [F3:INTER COPY SC→SC] [F4:DEL INTER SC MEM] [F5:INTER COPY BANK→BANK] [F6:DEL INTER BANK MEM] [F7:INITINAL SYSTEM] [F8:COPY SD→INTERMEMORY] Save and back to function menu 90 Lite-Puter CX-18 [EUM-D]
Page 1 and 2:
ISO 9001 CERTIFIED www.liteputer.co
Page 3 and 4:
Page 5 and 6:
Chapter 1 1-1 Feature ISO 9001 CERT
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
SHOW step is empty. ISO 9001 CERTIF
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
3-5-1 INSERT STEP ISO 9001 CERTIFIE
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40: ISO 9001 CERTIFIED www.liteputer.co
Page 41 and 42: 3-7-1 SMOKE Recall ISO 9001 CERTIFI
Page 43 and 44: 3-8-1 SPOT Recall ISO 9001 CERTIFIE
Page 45 and 46: 100 % 0s ISO 9001 CERTIFIED www.lit
Page 65 and 66: 4. BANK—〉BANK ISO 9001 CERTIFIE
Page 83 and 84: 5-9 Copy a bank ISO 9001 CERTIFIED
Page 89: ISO 9001 CERTIFIED www.liteputer.co
show all

【User Manual】 Lite-Puter Enterprise Co., Ltd. - Notape

Create successful ePaper yourself

Delete template?

Save as template?