【User Manual】 Lite-Puter Enterprise Co., Ltd. - Notape
【User Manual】 Lite-Puter Enterprise Co., Ltd. - Notape
【User Manual】 Lite-Puter Enterprise Co., Ltd. - Notape
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SHOW step<br />
is empty.<br />
ISO 9001 CERTIFIED www.liteputer.com.tw<br />
LITE-PUTER CX-18 Ver1.0<br />
BANK: 12 SHOW:18<br />
FAND : 0.1S WAIT:0.1S<br />
SPEED:0.1S SIZE:000%<br />
SCENE:EMPTY MACRO:OFF<br />
’ENTER’FOR’FADE/WAIT/SPEED/ANGLE’S<br />
E.<br />
’PREV’ TO PREVIEW PREGRAMED SHOW<br />
INTER MEMORY 08/01/2008<br />
Attention:<br />
FADE/WAIT/SPEED’s value can range from 0.1S to 25.5S.<br />
Size’s value can range from 000% to 100%.<br />
MACRO has 5 operate modes: OFF/PAN/TILT/CIRC/-CIRC<br />
SCENE can range from 1 to 32 steps.<br />
STEP-5 Press【P1—P18 FIXTURE NO.】to select any moving light need to edit. (The<br />
LED on P1—P18 will turn on when the correspond moving light is selected)<br />
For example: FADE TIME set as: 22.2S<br />
WAIT TIME set as: 18.6S<br />
SPEED TIME set as: 18.6S<br />
SIZE set as: 88%<br />
MACRO set as: PAN<br />
SCENE: SHOW step as 8 steps<br />
STEP-6 Press【ENTER】to select FAND/WAIT/SPEED. When FADE is selected, it displays<br />
as 0.1S, and move【FADE TIME PITCH】 FADER to change FADE TIME as 22.2S,<br />
LCD displays as below,<br />
24<br />
min. value:<br />
0.1S and 000%<br />
Moving light operate mode<br />
Reminder<br />
<strong>Lite</strong>-<strong>Puter</strong><br />
CX-18 [EUM-D]
Change language